Danfoss NLE15KTK.2 Data sheet

NLE15KTK.2

ø16

254

170

166

8248

113

127

47°

27°

51°

119

60.5

25°

35°

15°

93.5

75.5

102.5

100

204

178

205

Energy-optimized Tropical Compressor R600a 220-240V 50Hz

General

Code number 105H6966

Approvals EN 60335-2-34

Compressors on pallet 80

Application

Application LBP

Frequency Hz 50 60

Evaporating temperature °C -35 to -10 –

Voltage range V 187 - 254 –

Max. condensing temperature continuous (short) °C 60 (70) –

Max. winding temperature continuous (short) °C 125 (135) –

Cooling requirements

Frequency Hz 50 60

Application

32°C S – – – – –

38°C S – – – – –

43°C S – – – – –

Remarks on application:

Motor

Motor type RSIR/RSCR

LRA (rated after 4 sec. UL984), HST | LST A – 8.4

Cut in Current, HST | LST A – 13.1

Resistance, main | start winding (25°C)

Design

Displacement cm

Oil quantity (type) cm

Maximum refrigerant charge g 150

Free gas volume in compressor cm

Weight without electrical equipment kg 10.8

Dimensions

Height mm A 203

Suction connector location/I.D. mm | angle C 6.2 | 15°

Process connector location/I.D. mm | angle D 6.2 | 25°

Discharge connector location/I.D. mm | angle E 5.0 | 35°

Oil cooler connector location/I.D. mm | angle F –

Connector tolerance I.D. mm ±0.09, on 5.0 +0.12/+0.20

Remarks:

material | comment Cu-plated steel | Al cap

material | comment –

LBP MBP HBP LBP MBP HBP

Ω

9.0 12.0

B 197

B1 –

B2 –

320 (mineral)

14.65

2360

S = Static cooling normally suﬃcient O = Oil cooling F1 = Fan cooling 1.5 m/s (compressor compartment temperature equal to ambient temperature) F2 = Fan cooling 3.0 m/s necessary SG = Suction gas cooling normally suﬃcent – = not applicable in this area

October 2010 DEHC.ED.524.Z1.02 1/2

EN 12900 Household (CECOMAF) 220V, 50Hz, 2 W PTC consumption incl., static cooling

8223

Winding protector

Start winding

Main winding

pos.2

RSCR

8217

Winding protector

Start winding

Main winding

pos.1

RSIR

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 104 141 186 204 241 308 387

Power cons. in W 116 140 163 171 186 209 234

Current cons. in A 1.04 1.14 1.24 1.28 1.35 1.46 1.58

COP in W/W 0.89 1.00 1.14 1.19 1.30 1.47 1.65

ASHRAE LBP 220V, 50Hz, 2 W PTC consumption incl., static cooling

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 126 171 227 249 295 376 473

Power cons. in W 116 140 163 170 185 208 233

Current cons. in A 1.04 1.14 1.24 1.28 1.35 1.46 1.57

COP in W/W 1.09 1.22 1.40 1.46 1.59 1.80 2.03

Accessories NLE15KTK.2 Figure Code number Test conditions EN 12900/CECOMAF ASHRAE

PTC starting device 6.3 mm spade connectors

ePTC starting device 4.8 mm spade connectors 103N0050

Cover b 103N2010

Cord relief d 103N1010 Mounting accessories Code number

Run capacitor 4 µF (optional)

Protection screen for PTC g 103N0476 Snap-on in quantities Ø: 16 mm 118-1919

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in speciﬁcations already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2/2 DEHC.ED.524.Z1.02 October 2010

4.8 mm spade connectors 103N0018 Ambient temperature 32°C 32°C

4.8 mm spade connectors 103N0021 Liquid temperature no subcooling 32°C

6.3 mm spade connectors

4.8 mm spade connectors 117-7119 Bolt joint in quantities Ø: 16 mm 118-1918

(pos.1)

(pos.2)

103N0011 Condensing temperature 55°C 54.4°C

103N0016 Suction gas temperature 32°C 32°C

117-7117 Bolt joint for one compressor Ø: 16 mm 118-1917