Danfoss NLE11KK.4 Data sheet

NLE11KK.4

105H

6952

NLE11KK.4

8515-3

DANFOSS COMPRESSORS

Barcode on white background

Yellow background

Red stripe

Approvals

Application

R600a

SUCTION CONNECTOR

8122

R600a

Yellow warning label

ø16

254

170

166

8248

113

127

47°

27°

51°

119

60.

25°

35°

15°

93.

75.

102.

100

204

178

205

Energy-optimized Compressor R600a 220-240V 50Hz

General

Code number 105H6952

Approvals EN 60335-2-34 with Annex AA

Compressors on pallet 80

Application

Application LBP

Frequency Hz 50 60

Evaporating temperature °C -35 to -10 –

Voltage range V 198 - 254 –

Max. condensing temperature continuous (short) °C 60 (70) –

Max. winding temperature continuous (short) °C 125 (135) –

Cooling requirements at max. ambient temperature

Frequency Hz 50 60

Application

32°C S – – – – –

38°C S – – – – –

43°C S – – – – –

Remarks on application:

Motor

Motor type RSIR/RSCR

LRA (rated after 4 sec. UL984), HST | LST A – 4.8

Cut in Current, HST | LST A – 9.3

Resistance, main | start winding (25°C)

Design

Displacement cm

Oil quantity (type) cm

Maximum refrigerant charge g 150

Free gas volume in compressor cm

Weight without electrical equipment kg 10.8

Dimensions

Height mm A 190

Suction connector location/I.D. mm | angle C 6.2 | 15°

Process connector location/I.D. mm | angle D 6.2 | 25°

Discharge connector location/I.D. mm | angle E 5.0 | 35°

Oil cooler connector location/I.D. mm | angle F –

Connector tolerance I.D. mm ±0.09, on 5.0 +0.12/+0.20

Remarks:

June 2004 DEHC.ED.520.C1.02 1/2

LBP MBP HBP LBP MBP HBP

Ω

material | comment Cu-plated steel | Al caps

material | comment –

16.4 15.7

B 183

B1 –

B2 –

270 (mineral)

11.15

2310

S = Static cooling normally sucient O = Oil cooling F1 = Fan cooling 1.5 m/s (compressor compartment temperature equal to ambient temperature) F2 = Fan cooling 3.0 m/s necessary SG = Suction gas cooling normally sucent – = not applicable in this area

EN 12900 Household (CECOMAF) 220V, 50Hz, 2 W PTC consumption incl., static cooling

8223

Winding protector

Start winding

Main winding

pos.2

8217

Winding protector

Start winding

Main winding

pos.1

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 81.5 109 143 156 184 232 290

Power cons. in W 89.8 105 120 126 137 156 179

Current cons. in A 0.71 0.75 0.80 0.82 0.87 0.95 1.05

COP in W/W 0.91 1.05 1.19 1.24 1.34 1.48 1.62

EN 12900 Household (CECOMAF)

220V, 50Hz, RC 4µF, 2 W PTC consumption incl., static cooling

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 81.5 109 143 156 184 232 290

Power cons. in W 88.0 102 117 122 133 151 172

Current cons. in A 0.47 0.53 0.60 0.63 0.68 0.77 0.87

COP in W/W 0.93 1.07 1.22 1.28 1.38 1.54 1.69

ASHRAE LBP 220V, 50Hz, 2 W PTC consumption incl., static cooling

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 99.6 133 175 191 224 284 354

Power cons. in W 89.9 104 120 125 137 156 179

Current cons. in A 0.71 0.75 0.80 0.82 0.87 0.95 1.05

COP in W/W 1.11 1.28 1.46 1.52 1.64 1.82 1.98

ASHRAE LBP

220V, 50Hz, RC 4µF, 2 W PTC consumption incl., static cooling

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 99.6 133 175 191 224 284 354

Power cons. in W 88.1 102 117 122 133 151 171

Current cons. in A 0.47 0.53 0.60 0.63 0.68 0.77 0.87

COP in W/W 1.13 1.31 1.50 1.56 1.69 1.88 2.06

Accessories Figure Code number Test conditions EN 12900/CECOMAF ASHRAE

PTC starting device 6.3 mm spade connectors

ePTC starting device 4.8 mm spade connectors 103N0050 Suction gas temperature 32°C 32°C

PTC starting device 6.3 mm spade connectors a1 103N0016 Liquid temperature no subcooling 32°C

Cover b 103N2010

Cord relief d 103N1010 Mounting accessories Code number

Run capacitor 4 µF (optional)

Protection screen for PTC g 103N0476 Snap-on in quantities Ø: 16 mm 118-1919

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specications already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2/2 DEHC.ED.520.C1.02 June 2004

4.8 mm spade connectors 103N0018 Ambient temperature 32°C 32°C

4.8 mm spade connectors (pos.2) 103N0021

6.3 mm spade connectors

4.8 mm spade connectors 117-7119 Bolt joint in quantities Ø : 16 mm 118-1918

(pos.1)

103N0011 Condensing temperature 55°C 54.4°C

117-7117 Bolt joint for one compressor Ø : 16 mm 118-1917