Danfoss NLE10MF Data sheet

Datasheets

NLE10MF

Energy-optimized Compressor

R134a, 220-240V 50Hz

General

Code number 105G6888

Approvals EN 60335-2-34

Compressors on pallet 80

Application

Application LBP/MBP

Frequency Hz 50 60

Evaporating temperature °C -35 to 7.2 –

Voltage range V 198 - 254 –

Max. condensing temperature continuous (short) °C 60 (70) –

Max. winding temperature continuous (short) °C 125 (135) –

Cooling requirements

Frequency Hz 50 60

Application

32°C F1F1– – – –

38°C F

43°C F

Remarks on application:

LBP MBP HBP LBP MBP HBP

1F1

– – – –

S =Staticcoolingnormallysufcient

O = Oil cooling F1 = Fan cooling 1.5 m/s (compressor compartment temperature equal to ambient temperature) F2 = Fan cooling 3.0 m/s necessary

SG =Suctiongascoolingnormallysufcent

– = not applicable in this area

Motor

Motor type RSIR/CSIR

LRA (rated after 4 sec. UL984), HST | LST A 13.7 12.1

Cut in Current, HST | LST A 13.7 15.6

Resistance, main | start winding (25°C) Ω 6.1 16.0

Design

Displacement cm

Oil quantity (type) cm

Maximum refrigerant charge g 600

Free gas volume in compressor cm

Weight without electrical equipment kg 10.5

Dimensions

Height mm A 203

Suction connector location/I.D. mm | angle C 8.2 | 15°

material | comment Copper | Rubber plug

Process connector location/I.D. mm | angle D 6.2 | 25°

material | comment Copper | Rubber plug

Discharge connector location/I.D. mm | angle E 6.2 | 35°

material | comment Copper | Rubber plug

Oil cooler connector location/I.D. mm | angle F –

material | comment –

Connector tolerance I.D. mm ±0.09

Remarks:

320 (polyolester)

B 197

B1 –

B2 –

10.10

2360

DEHC.ED.200.D5.02 | 1

EN 12900 Household (CECOMAF) 220V, 50Hz, fan cooling F

Danf already on order pro All trademarks in this material are property of the respec

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 88.0 137 194 216 262 343 440 513 554 688 845 922

Power cons. in W 134 165 198 210 233 270 308 334 347 386 426 443

Current cons. in A 1.43 1.50 1.60 1.63 1.71 1.84 2.00 2.11 2.17 2.36 2.57 2.67

COP in W/W 0.66 0.83 0.98 1.03 1.13 1.27 1.43 1.54 1.60 1.78 1.98 2.08

ASHRAE MBP 220V, 50Hz, fan cooling F

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 98.1 152 215 239 290 379 485 566 611 759 933 1018

Power cons. in W 134 165 198 209 233 269 307 332 346 385 424 441

Current cons. in A 1.44 1.51 1.60 1.63 1.71 1.84 1.99 2.10 2.16 2.35 2.56 2.66

COP in W/W 0.73 0.92 1.09 1.14 1.25 1.41 1.58 1.70 1.77 1.97 2.20 2.31

ASHRAE LBP 220V, 50Hz, fan cooling F

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 110 171 241 268 326 426 545 636 687 855 1051 1148

Power cons. in W 134 165 198 209 233 269 307 332 346 385 424 441

Current cons. in A 1.44 1.51 1.60 1.63 1.71 1.84 1.99 2.10 2.16 2.35 2.56 2.66

COP in W/W 0.82 1.04 1.22 1.28 1.40 1.58 1.78 1.91 1.99 2.22 2.48 2.60

Accessories for NLE10MF Figure Code

number

PTC starting device 6.3 mm spade connectors

4.8 mm spade connectors 103N0018 Ambient temperature 32°C 35°C 32°C

103N0011 Condensing temperature 55°C 54.4°C 54.4°C

Test conditions

EN 12900/

CECOMAF

ASHRAE

MBP

Starting relay 6.3 mm spade connectors a2 117U6003 Suction gas temperature 32°C 35°C 32°C

Start. capacitor 80 µF 6.3 mm spade connectors c 117U5015 Liquid temperature no subcooling 46.1°C 32°C

Cover b 103N2011

Cord relief d 103N1010 Mounting accessories Code number

Protection screen for PTC g 103N0476 Bolt joint for one comp. Ø: 16 mm 118-1917

Bolt joint in quantities Ø: 16 mm 118-1918

Snap-on in quantities Ø: 16 mm 118-1919

oss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products

vided that such alterations can be made without subsequential changes being necessary eady agreed.

ASHRAE

LBP