Danfoss NLE10CN Data sheet

Datasheets

NLE10CN

Energy-optimized LBP/MBP Compressor

R290, 220-240V 50Hz

General

Code number 105H6175

Approvals EN 60335-2-34 w. Annex AA

Compressors on pallet 80

Application

Application LBP/MBP

Frequency Hz 50 60

Evaporating temperature °C -35 to 10 –

Voltage range V 198 to 254 –

Max. condensing temperature continuous (short) °C 55 (65) –

Max. winding temperature continuous (short) °C 125 (135) –

Cooling requirements

Frequency Hz 50 60

Application

32°C F2F2– – – –

38°C F2F2– – – –

43°C F2F2– – – –

Remarks on application:

Motor

Motor type CSIR/RSIR/RSCR

LRA (rated after 4 sec. UL984), HST | LST A 12.0 10.9

Cut in Current, HST | LST A 12.0 15.8

Resistance, main | start winding (25°C) Ω 8.0 18.0

LBP MBP HBP LBP MBP HBP

This product is approved for
R290 regarding explosion
safety according to standard
EN 60335-1 and EN 60335­2-34

S =Staticcoolingnormallysufcient

O = Oil cooling
F1 = Fan cooling 1.5 m/s
(compressor compartment temperature
equal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary

SG =Suctiongascoolingnormallysufcent

– = not applicable in this area

Design

Displacement cm

Oil quantity (type) cm

Maximum refrigerant charge g 150

Free gas volume in compressor cm

Weight without electrical equipment kg 12.1

Dimensions

Height mm A 203

Suction connector location/I.D. mm | angle C 8.2 | 45°

material | comment Copper | Rubber plug

Process connector location/I.D. mm | angle D 6.2 | 25°

material | comment Copper | Rubber plug

Discharge connector location/I.D. mm | angle E 6.2 | 15°

material | comment Copper | Rubber plug

Oil cooler connector location/I.D. mm | angle F –

material | comment –

Connector tolerance I.D. mm ±0.09

Remarks:

3

3

3

320 (polyolester)

B 197

B1 –

B2 –

10.09

2360

© Danfoss | DCS (CC) | 2017.04

DEHC.ED.200.D4.02 | 1

EN 12900 LBP 220V, 50Hz, fan cooling F

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 289 364 455 491 565 695 845 956 1017 1212 1431 1535 1675

Power cons. in W 242 275 308 320 341 372 400 416 424 444 459 463 467

Current cons. in A 1.87 1.95 2.04 2.08 2.14 2.24 2.33 2.38 2.41 2.47 2.52 2.53 2.54

COP in W/W 1.20 1.32 1.48 1.54 1.66 1.87 2.11 2.30 2.40 2.73 3.12 3.31 3.59

2

EN 12900 MBP 220V, 50Hz, fan cooling F

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 268 339 427 461 532 654 796 900 957 1140 1345 1443 1574

Power cons. in W 246 281 316 328 351 385 418 438 448 474 495 503 511

Current cons. in A 1.89 1.97 2.06 2.10 2.17 2.28 2.39 2.45 2.49 2.58 2.65 2.68 2.70

COP in W/W 1.09 1.21 1.35 1.41 1.51 1.70 1.90 2.06 2.14 2.41 2.72 2.87 3.08

ASHRAE LBP 220V, 50Hz, fan cooling F

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 267 350 449 486 565 702 859 974 1037 1240 1467 1575 1721

Power cons. in W 244 280 318 331 357 397 437 462 475 510 543 556 571

Current cons. in A 1.91 2.00 2.11 2.15 2.24 2.37 2.52 2.62 2.67 2.81 2.94 3.00 3.06

COP in W/W 1.09 1.25 1.41 1.47 1.58 1.77 1.97 2.11 2.19 2.43 2.70 2.83 3.01

ASHRAE MBP/HBP 220V, 50Hz, fan cooling F

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 239 312 401 434 505 626 766 868 924 1104 1304 1400 1528

Power cons. in W 242 277 315 328 354 393 432 457 469 504 536 549 564

Current cons. in A 1.91 2.00 2.11 2.15 2.24 2.37 2.52 2.62 2.67 2.81 2.94 3.00 3.06

COP in W/W 0.99 1.13 1.27 1.32 1.43 1.59 1.77 1.90 1.97 2.19 2.43 2.55 2.71

2

2

2

Accessories for NLE10CN Figure Code number Test conditions

ePTC starting device 6.3 mm spade connectors

4.8 mm spade connectors 103N0050 Ambient temperature 32°C 32°C 32.2°C 35°C

Starting relay 6.3 mm spade connectors a2 117U7002 Suction gas temperature 20°C 20°C 32.2°C 35°C

Start. capacitor 80 µF 6.3 mm spade connectors c 117U5015 Liquid temperature no subcooling 32.2°C 46.1°C

Cover b 103N2010

Cord relief d 103N1010 Mounting accessories Code number

Protection screen for PTC g – Bolt joint for one comp. Ø: 16 mm 118-1917

a1

– Condensing temperature 40°C 45°C 54.4°C 54.4°C

Bolt joint in quantities Ø: 16 mm 118-1918

Snap-on in quantities Ø: 16 mm 118-1919

© Danfoss | DCS (CC) | 2017.04

EN 12900

LBP MBP

DEHC.ED.200.D4.02 | 2

ASHRAE

LBP MBP

EN 12900 LBP 220V, 50Hz, RC 4 µF, ePTC consumption incl., fan cooling F

Danf
already on order pro
All trademarks in this material are property of the respec

2

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 292 367 460 496 571 702 854 966 1028 1224 1445 1550 1691

Power cons. in W 237 267 298 308 328 356 383 398 406 425 439 443 447

Current cons. in A 1.43 1.58 1.71 1.75 1.83 1.94 2.03 2.08 2.10 2.16 2.20 2.21 2.22

COP in W/W 1.23 1.37 1.54 1.61 1.74 1.97 2.23 2.43 2.53 2.88 3.29 3.50 3.78

EN 12900 MBP 220V, 50Hz, RC 4 µF, ePTC consumption incl., fan cooling F

2

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 270 343 431 465 537 661 804 909 967 1152 1359 1458 1590

Power cons. in W 242 274 307 318 340 372 403 422 431 456 477 484 492

Current cons. in A 1.46 1.60 1.72 1.76 1.83 1.94 2.03 2.09 2.12 2.19 2.24 2.27 2.29

COP in W/W 1.12 1.25 1.41 1.46 1.58 1.78 2.00 2.16 2.24 2.53 2.85 3.01 3.23

ASHRAE LBP 220V, 50Hz, RC 4 µF, ePTC consumption incl., fan cooling F

2

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 270 353 453 491 571 709 867 984 1048 1252 1482 1591 1738

Power cons. in W 236 270 307 319 344 382 419 443 455 488 518 530 544

Current cons. in A 1.59 1.71 1.84 1.88 1.96 2.09 2.21 2.29 2.33 2.45 2.57 2.62 2.68

COP in W/W 1.14 1.31 1.48 1.54 1.66 1.86 2.07 2.22 2.30 2.57 2.86 3.00 3.20

ASHRAE MBP/HBP 220V, 50Hz, RC 4 µF, ePTC consumption incl., fan cooling F

2

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 241 316 405 439 510 633 773 877 934 1115 1318 1414 1543

Power cons. in W 234 268 304 316 341 378 415 438 450 482 512 523 537

Current cons. in A 1.59 1.71 1.84 1.88 1.96 2.09 2.21 2.29 2.33 2.45 2.57 2.62 2.68

COP in W/W 1.03 1.18 1.33 1.39 1.50 1.67 1.87 2.00 2.08 2.31 2.57 2.70 2.88

Accessories for NLE10CN Figure Code number Test conditions

EN 12900

LBP MBP

ePTC starting device 6.3 mm spade connectors

4.8 mm spade connectors 103N0050 Ambient temperature 32°C 32°C 32.2°C 35°C

a1

– Condensing temperature 40°C 45°C 54.4°C 54.4°C

Run capacitor 4 µF 4.8 mm spade connectors e 117-7119 Suction gas temperature 20°C 20°C 32.2°C 35°C

(optional) Liquid temperature no subcooling 32.2°C 46.1°C

Cover b 103N2010

Cord relief d 103N1010 Mounting accessories Code number

Protection screen for PTC g – Bolt joint for one comp. Ø: 16 mm 118-1917

Bolt joint in quantities Ø: 16 mm 118-1918

Snap-on in quantities Ø: 16 mm 118-1919

oss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products

vided that such alterations can be made without subsequential changes being necessary eady agreed.

tive companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

3 |© Danfoss | DCS (CC) | 2017.04 DEHC.ED.200.D4.02

ASHRAE

LBP MBP