Danfoss NL9CN LBP, NL9CN MBP Data sheet

Datasheets

NL9CN

LBP/MBP Compressor

R290, 220-240V 50Hz

General

Code number 105H6856

Approvals

Compressors on pallet 80

Application

Application LBP/MBP

Frequency Hz 50 60

Evaporating temperature °C -40 to 5 –

Voltage range V 198 - 254 –

Max. condensing temperature continuous (short) °C 55 (65) –

Max. winding temperature continuous (short) °C 125 (135) –

Cooling requirements

Frequency Hz 50 60

Application

32°C F1F1– – – –

38°C F

43°C F

Remarks on application: Run capacitor 4 µF compulsory in 43°C ambient

temperature at MBP conditions.

Motor

Motor type RSIR/RSCR/CSIR

LRA (rated after 4 sec. UL984), HST | LST A 10.4 9.2

Cut in Current, HST | LST A 10.4 13.6

Resistance, main | start winding (25°C) Ω 8.2 14.7

EN 60335-2-34 w. Annex AA, CCC

LBP MBP HBP LBP MBP HBP

1F1

2F2

– – – –

This product is approved for R290 regarding explosion safety according to standard EN 60335-1 and EN 603352-34

S =Staticcoolingnormallysufcient

O = Oil cooling F1 = Fan cooling 1.5 m/s (compressor compartment temperature equal to ambient temperature) F2 = Fan cooling 3.0 m/s necessary

SG =Suctiongascoolingnormallysufcent

– = not applicable in this area

Design

Displacement cm

Oil quantity (type) cm

Maximum refrigerant charge g 150

Free gas volume in compressor cm

Weight without electrical equipment kg 10.5

Dimensions

Height mm A 203

Suction connector location/I.D. mm | angle C 8.2 | 15°

material | comment Copper | Rubber plug

Process connector location/I.D. mm | angle D 6.2 | 25°

material | comment Copper | Rubber plug

Discharge connector location/I.D. mm | angle E 6.2 | 35°

material | comment Copper | Rubber plug

Oil cooler connector location/I.D. mm | angle F –

material | comment –

Connector tolerance I.D. mm ±0.09

Remarks:

320 (polyolester)

B 197

B1 –

B2 –

8.35

2360

DEHC.ED.200.B6.02 | 1

EN 12900 Household (CECOMAF)* 220V, 50Hz, 2 W PTC consumption incl., fan cooling F

Danf already on order pro All trademarks in this material are property of the respec

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 138 194 259 335 364 423 526 643 730 778 930 1102

Power cons. in W 169 196 223 250 259 278 306 334 354 364 395 428

Current cons. in A 1.44 1.50 1.56 1.64 1.67 1.73 1.83 1.95 2.03 2.08 2.21 2.36

COP in W/W 0.81 0.99 1.16 1.34 1.40 1.53 1.72 1.92 2.06 2.13 2.35 2.58

ASHRAE LBP* 220V, 50Hz, 2 W PTC consumption incl., fan cooling F

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 153 216 289 374 406 473 587 719 816 869 1041 1235

Power cons. in W 169 196 223 250 259 278 306 334 354 364 395 428

Current cons. in A 1.44 1.50 1.56 1.64 1.67 1.73 1.83 1.95 2.03 2.08 2.21 2.36

COP in W/W 0.91 1.10 1.29 1.49 1.56 1.70 1.92 2.15 2.30 2.39 2.63 2.89

Accessories for NL9CN Figure Code number Test conditions

EN 12900/

ASHRAE LBP*

CECOMAF*

PTC starting device 6.3 mm spade connectors a1 103N0011 Condensing temperature 45°C 45°C

4.8 mm spade connectors (pos.1) 103N0018 Ambient temperature 32°C 32°C

PTC starting device 6.3 mm spade connectors a1 103N0016 Suction gas temperature 32°C 32°C

4.8 mm spade connectors (pos.2) 103N0021 Liquid temperature no subcooling 32°C

Starting relay 6.3 mm spade connectors a2 117U7002

Start. capacitor 80 µF 6.3 mm spade connectors c 117U5015 Mounting accessories Code number

Cover b 103N2010 Bolt joint for one comp. Ø: 16 mm 118-1917

Cord relief d 103N1010 Bolt joint in quantities Ø: 16 mm 118-1918

Run capacitor 4 µF 6.3 mm spade connectors

(optional) 4.8 mm spade connectors 117-7119

117-7117 Snap-on in quantities Ø: 16 mm 118-1919

Protection screen for PTC g 103N0476

oss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products

vided that such alterations can be made without subsequential changes being necessary eady agreed.