Danfoss NF6.1FX.2 Data sheet

NF6.1FX.2 Standard Compressor R134a 115-127V 60Hz

General

Code number 105G5631

Approvals UL984

Compressors on pallet 80

Application

Application LBP/MBP

Frequency Hz 50 60

Evaporating temperature °F – -31 to 45

Voltage range V – 95 - 135

Max. condensing temperature continuous (short) °F – 140 (158)

Max. winding temperature continuous (short) °F – 257 (275)

Cooling requirements

Frequency Hz 50 60

Application

90°F – – – F1F1–

100°F – – – F1F1–

110°F – – – F1F1–

Remarks on application:

Motor

Motor type CSIR

LRA (rated after 4 sec. UL984), HST | LST A 22.2 –

Cut in Current, HST | LST A 22.2 –

Resistance, main | start winding (77°F) Ω 2.0 3.1

Design

Displacement cu.in 0.37

Oil quantity (type) .oz. 10.8 (polyolester)

Maximum refrigerant charge oz. 14.0

Free gas volume in compressor .oz. 79.7

Weight without electrical equipment lbs. 22.0

Dimensions

Height inch A 7.76

Suction connector location, I.D. in. | angle C 0.320-0.327 | 15°

material | comment Copper | Rubber plug

Process connector location, I.D. in. | angle D 0.252-0.259 | 25°

material | comment Copper | Rubber plug

Discharge connector location, I.D. in. | angle E 0.252-0.259 | 35°

material | comment Copper | Rubber plug

Oil cooler connector location, I.D. in. | angle F –

material | comment –

Remarks:

LBP MBP HBP LBP MBP HBP

B 7.52

B1 –

B2 –

S = Static cooling normally sufcient

O = Oil cooling F

= Fan cooling 1.5 m/s

(compressor compartment temperature equal to ambient temperature) F2 = Fan cooling 3.0 m/s necessary

SG = Suction gas cooling normally sufcent

– = not applicable in this area

Dec 2011 Manufactured by Secop for Danfoss - DEHC.ED.402.R2.22 / 502N0283 1/2

ASHRAE LBP 115V, 60Hz, fan cooling F

Evap. temp. in °F -49 -40 -30 -20 -13 -10 0 10 14 20 30 40 41 45 50 59 68

Capacity in BTU/h 309 493 647 721 999 1336 1488 1737 2208 2759 2818 3065

Power cons. in W 121 150 170 178 204 229 239 255 282 312 315 327

Current cons. in A 2.45 2.55 2.62 2.66 2.78 2.93 2.99 3.09 3.27 3.47 3.49 3.57

EER in BTU/Wh 2.56 3.28 3.82 4.06 4.91 5.83 6.22 6.81 7.82 8.85 8.95 9.36

ASHRAE MBP 115V, 60Hz, fan cooling F

Evap. temp. in °F -49 -40 -30 -20 -13 -10 0 10 14 20 30 40 41 45 50 59 68

Capacity in BTU/h 275 438 575 641 888 1186 1321 1541 1959 2445 2498 2716

Power cons. in W 121 150 170 178 204 229 239 255 282 312 315 327

Current cons. in A 2.45 2.55 2.62 2.66 2.78 2.93 2.99 3.09 3.27 3.47 3.49 3.57

EER in BTU/Wh 2.28 2.91 3.39 3.61 4.36 5.18 5.52 6.04 6.94 7.84 7.93 8.29

EN 12900 Household (CECOMAF) 115V, 60Hz, fan cooling F

Evap. temp. in °F -49 -40 -30 -20 -13 -10 0 10 14 20 30 40 41 45 50 59 68

Capacity in W 73 116 153 170 236 316 352 411 522 652 666 724

Power cons. in W 120 150 169 178 204 230 240 256 283 313 316 329

Current cons. in A 2.45 2.55 2.62 2.66 2.79 2.93 3.00 3.10 3.28 3.48 3.50 3.58

COP in W/W 0.61 0.78 0.90 0.96 1.16 1.38 1.47 1.61 1.84 2.08 2.11 2.20

Accessories for NF6.1FX.2 Figure Code number Test conditions

Starting relay 1/4 in. spade connect.

Protector 3/4 in. Texas Instruments MRP36AEN Ambient temp.

117U4127 Condensing temp.

Start. capacitor 280 µF 1/4 in. spade connect. c 117U5025 Suction gas temp.

Cover b 117U1021 Liquid temperature

ASHRAE

LBP

ASHRAE

MBP

130°F 130°F

90°F 95°F

90°F 115°F

EN 12900/

CECOMAF

131°F

90°F

no subcooling

Cord relief d 117U0349

Cord relief for capacitor dc 117U0349 Mounting accessories Code number

Bolt joint for one comp. Ø : 5/ 8 in . 118-1917

Bolt joint in quantities Ø: 5/8 in. 118-1918

Snap-on in quantities Ø: 5/8 in. 118-1919

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products

already on order provided that such alterations can be made without subsequential changes being necessary in specications already agreed.

2/2 Manufactured by Secop for Danfoss - DEHC.ED.402.R2.22 / 502N0283 Dec 2011