Danfoss NF5.5FX Data sheet

NF5.5FX Standard Compressor R134a 115-127V 60Hz

General

Code number 105G5623

Approvals UL984

Compressors on pallet 80

Application

Application LBP/MBP

Frequency Hz 50 60

Evaporating temperature °F – -31 to 45

Voltage range V – 95 - 135

Max. condensing temperature continuous (short) °F – 140 (158)

Max. winding temperature continuous (short) °F – 257 (275)

Cooling requirements

Frequency Hz 50 60

Application

90°F – – – F1F1–

100°F – – – F1F1–

110°F – – – F1F1–

Remarks on application:

Motor

Motor type CSIR

LRA (rated after 4 sec. UL984), HST | LST A 22.2 –

Cut in Current, HST | LST A 22.2 –

Resistance, main | start winding (77°F) Ω 2.0 3.1

Design

Displacement cu.in 0.37

Oil quantity (type) .oz. 10.8 (polyolester)

Maximum refrigerant charge oz. 17.5

Free gas volume in compressor .oz. 79.7

Weight without electrical equipment lbs. 22.0

Dimensions

Height inch A 7.76

Suction connector location, I.D. in. | angle C 0.320-0.327 | 15°

material | comment Cu-plated steel | Rubber plug

Process connector location, I.D. in. | angle D 0.252-0.259 | 25°

material | comment Cu-plated steel | Rubber plug

Discharge connector location, I.D. in. | angle E 0.252-0.259 | 35°

material | comment Cu-plated steel | Rubber plug

Oil cooler connector location, I.D. in. | angle F –

material | comment –

Remarks:

LBP MBP HBP LBP MBP HBP

B 7.52

B1 –

B2 –

S = Static cooling normally sufcient

O = Oil cooling F

= Fan cooling 1.5 m/s

(compressor compartment temperature equal to ambient temperature) F2 = Fan cooling 3.0 m/s necessary

SG = Suction gas cooling normally sufcent

– = not applicable in this area

Dec 2011 Manufactured by Secop for Danfoss - DEHC.ED.400.Q9.22 / 502N1255 1/2

ASHRAE LBP 115V, 60Hz, fan cooling F

Evap. temp. in °F -49 -40 -30 -20 -13 -10 0 10 14 20 30 32 40 45 50 59 68

Capacity in BTU/h 298 481 627 695 950 1257 1397 1625 2065 2165 2588 2884

Power cons. in W 97.4 135 159 169 200 228 239 255 280 285 305 317

Current cons. in A 2.18 2.34 2.45 2.50 2.67 2.85 2.93 3.04 3.24 3.28 3.44 3.54

EER in BTU/Wh 3.06 3.57 3.95 4.12 4.76 5.51 5.85 6.38 7.37 7.60 8.49 9.09

ASHRAE MBP 115V, 60Hz, fan cooling F

Evap. temp. in °F -49 -40 -30 -20 -13 -10 0 10 14 20 30 32 40 45 50 59 68

Capacity in BTU/h 265 428 558 618 845 1116 1247 1442 1831 1926 2293 2555

Power cons. in W 97.4 135 159 169 200 228 239 255 280 285 305 317

Current cons. in A 2.18 2.34 2.45 2.50 2.67 2.85 2.93 3.04 3.24 3.28 3.44 3.54

EER in BTU/Wh 2.72 3.17 3.51 3.66 4.23 4.90 5.22 5.66 6.54 6.76 7.52 8.05

EN 12900 Household (CECOMAF) 115V, 60Hz, fan cooling F

Evap. temp. in °F -49 -40 -30 -20 -13 -10 0 10 14 20 30 32 40 45 50 59 68

Capacity in W 70 114 148 165 225 297 330 384 488 511 611 680

Power cons. in W 97.4 135 159 169 200 228 239 255 280 286 305 317

Current cons. in A 2.18 2.34 2.45 2.50 2.67 2.85 2.93 3.04 3.24 3.29 3.44 3.54

COP in W/W 0.73 0.85 0.93 0.98 1.13 1.30 1.38 1.50 1.74 1.79 2.00 2.13

Accessories for NF5.5FX Figure Code number Test conditions

Starting relay 1/4 in. spade connect.

Protector 3/4 in. Texas Instruments MRP36AEN-6 Ambient temp.

117U4127 Condensing temp.

Start. capacitor 280 µF 1/4 in. spade connect. c 117U5025 Suction gas temp.

Cover b 117U1021 Liquid temperature

ASHRAE

LBP

ASHRAE

MBP

130°F 130°F

90°F 95°F

90°F 115°F

EN 12900/

CECOMAF

131°F

90°F

131°F

Cord relief d 117U0349

Cord relief for capacitor dc 117U0349 Mounting accessories Code number

Bolt joint for one comp. Ø : 5 /8 in . 118-1917

Bolt joint in quantities Ø: 5 /8 in. 118-1918

Snap-on in quantities Ø: 5/8 i n. 118-1919

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products

already on order provided that such alterations can be made without subsequential changes being necessary in specications already agreed.

2/2 Manufactured by Secop for Danfoss - DEHC.ED.400.Q9.22 / 502N1255 Dec 2011