Danfoss NEODUL L Installation guide

NEODUL® L Thermal insulation for heating water storage tanks

Series: PSS (up to 2000l volume)

Assembly:

1 2

VI.JV.U2.02 | 1

NEODUL® L Thermal insulation for heating water storage tanks

Series: PSS (up to 2000l volume)

! 3

4 5

2 | © Danfoss | DHS-SMT/PL | 2018.04

• Assembly stand-ring and lower ring insulation before placing the tank on site (1)

• Put the insulation [jacket part(s)] around the tank(2 ﬀ.); in case of several parts connect these parts by the zipper strip. Put the ﬂeece mat, which is longer than the EPS-Layer, overlapping at the open joints in order to reduce the heat loss.

• Close the zipper of jacket part(s) (3)

• Put cover insulation on top (4)

• Place enclosed rosettes from outside into the recesses of shell part(s) for connections (pipes) (5)

VI.JV.U2.02