Danfoss MP1 Pumps NFPE User guide

Electrical Installation
MP1 Pumps
Non-Feedback Proportional Electric (NFPE) Control
powersolutions.danfoss.com
MP1 Pumps Non-Feedback Proportional Electric (NFPE) Control
Revision history Table of revisions
Date Changed Rev
January 2018 add control current table 0103
November 2017 New cover image 0102
October 2017 First Edition 0101
2 | © Danfoss | January 2018 BC00000392en-US0103
MP1 Pumps Non-Feedback Proportional Electric (NFPE) Control

Contents

Literature References
MP1 Reference Literature..............................................................................................................................................................4
Latest version of technical literature.........................................................................................................................................4
Product Overview
Product Image................................................................................................................................................................................... 5
Nomenclature....................................................................................................................................................................................5
Theory of operation.........................................................................................................................................................................6
NFPE proportional actuation.................................................................................................................................................. 6
Hydrostatic drive line power...................................................................................................................................................6
Hydraulic schematic........................................................................................................................................................................ 6
Electrical specifications.................................................................................................................................................................. 7
Electrical installation
Pinout....................................................................................................................................................................................................8
DEUTSCH connector.................................................................................................................................................................. 8
Pin compatibility...............................................................................................................................................................................8
Input/output matrix........................................................................................................................................................................ 8
Mating connector.............................................................................................................................................................................9
DEUTSCH connector parts list ............................................................................................................................................... 9
©
Danfoss | January 2018 BC00000392en-US0103 | 3
MP1 Pumps Non-Feedback Proportional Electric (NFPE) Control

Literature References

MP1 Reference Literature

Literature title Description Literature number
MP1 Axial Piston Pumps Technical Information Complete product electrical

Latest version of technical literature

Danfoss product literature is online at: http://powersolutions.danfoss.com/literature/
and mechanical
BC00000352
specifications
4 | © Danfoss | January 2018 BC00000392en-US0103
MP1
P
Prod A B C
D F H
J
T
K
E
M N Z
L
V
G
W X
Y
MP1 Pumps Non-Feedback Proportional Electric (NFPE) Control

Product Overview

Product Image

MP1 NFPE control

Nomenclature

Model code
D - Control
Code Description
SN1 NFPE, 12V, Manual Over-Ride, Inch ports SN2 NFPE, 24V, Manual Over-Ride, Inch ports MN1 NFPE, 12V, Manual Over-Ride, Metric ports MN2 NFPE, 24V, Manual Over-Ride, Metric ports
Only certain control options for the MP1 pump utilize Non-Feedback Proportional Electric Control (NFPE). Please refer to the pump’s nomenclature to determine if the pump is equipped with the proper option. The nomenclature can be found on the pump’s nametag.
©
Danfoss | January 2018 BC00000392en-US0103 | 5
0
Signal Current (mA(DC
avg
))
Displacement
100 %
100 %
NFPE control
∆p = 300 bar
∆p = 300 bar
∆p = 0 bar
∆p = 0 bar
W
C2C1
F00A
M14
T
PF00B
MP1 Pumps Non-Feedback Proportional Electric (NFPE) Control
Product Overview

Theory of operation

The Non Feedback Proportional Electric (NFPE) control is an electrical automotive control in which an electrical input signal activates one of two proportional solenoids that port charge pressure to either side of the pump servo cylinder. The NFPE control has no mechanical feedback mechanism. The pump displacement is proportional to the solenoid signal current, but it also depends upon pump input speed and system pressure.

NFPE proportional actuation

Hydraulic schematic

Hydrostatic drive line power

Warning
Unintended vehicle or machine movement hazard. The loss of hydrostatic drive line power, in any mode of operation (forward, neutral, or reverse) may cause the system to lose hydrostatic braking capacity. You must provide a braking system, redundant to the hydrostatic transmission, sufficient to stop and hold the vehicle or machine in the event of hydrostatic drive power loss.
NFPE Schematic
6 | © Danfoss | January 2018 BC00000392en-US0103
MP1 Pumps Non-Feedback Proportional Electric (NFPE) Control
Product Overview

Electrical specifications

Control current
Voltage a
12 V 600 mA 1080 mA 1360 mA any order 24 V 300 mA 540 mA 680 mA
*
Factory test current, for vehicle movement or application actuation expect higher or lower value.
MP1 pump NFPE electrical specifications
Voltage Rated power Coil resistance at 20º C [70º F] Coil resistance at 80ºC [176ºF] PWM frequency range Recommended PWM frequency Inductance
*
PWM signal required for optimum control performance. Verify the PWM frequency is set correctly in the PLUS+1
controller. The default is set at 4000 Hz which will significantly reduce NFPE performance.
*
b c Pin connections
*
12V 24V
18 W 18 W
3.66 Ω 14.20 Ω
4.52 Ω 17.52 Ω
70 to 200 Hz 70 to 200 Hz
100 Hz 100 Hz
33 mH 140 mH
®
©
Danfoss | January 2018 BC00000392en-US0103 | 7
1 2
W
C1
C2
MP1 Pumps Non-Feedback Proportional Electric (NFPE) Control
Electrical installation

Pinout

DEUTSCH connector

Pin location
Pinout
Pin Function
1 PWM signal 2 Ground
Pinout (alternative)
Pin Function
1 Ground 2 PWM signal

Pin compatibility

Input/output matrix

PLUS+1® module pin type
Pin Function
1, 2 PWMOUT/DOUT/PVG Power supply 1, 2 PWMOUT/DOUT/PVGOUT 1, 2 Power ground -
Warning
Unintended vehicle or machine movement hazard. Verify the wiring harness to ensure the correct PLUS +1® pin is properly connected to each control pin.
NFPE/C1 and C2 location
8 | © Danfoss | January 2018 BC00000392en-US0103
MP1 Pumps Non-Feedback Proportional Electric (NFPE) Control
Electrical installation
Pump output flow direction versus control signal
Shaft rotation CW CCW
Coil energized C1 C2 C1 C2
Port A in out out in Port B out in in out Servo port pressurized M5 M4 M5 M4

Mating connector

DEUTSCH connector parts list

Description Quantity Ordering number
Connector Wedge lock Socket contact (16 and 18 AWG) Mating connector kit
1 DEUTSCH DT06-2S 1 DEUTSCH W2S 2 DEUTSCH 0462-201-16141 1 Danfoss K29657
©
Danfoss | January 2018 BC00000392en-US0103 | 9
MP1 Pumps Non-Feedback Proportional Electric (NFPE) Control
10 | © Danfoss | January 2018 BC00000392en-US0103
MP1 Pumps Non-Feedback Proportional Electric (NFPE) Control
©
Danfoss | January 2018 BC00000392en-US0103 | 11
Danfoss Power Solutions GmbH & Co. OHG
Krokamp 35 D-24539 Neumünster, Germany Phone: +49 4321 871 0
Danfoss Power Solutions ApS
Nordborgvej 81 DK-6430 Nordborg, Denmark Phone: +45 7488 2222
Danfoss Power Solutions (US) Company
2800 East 13th Street Ames, IA 50010, USA Phone: +1 515 239 6000
Danfoss Power Solutions Trading (Shanghai) Co., Ltd.
Building #22, No. 1000 Jin Hai Rd Jin Qiao, Pudong New District Shanghai, China 201206 Phone: +86 21 3418 5200
Products we offer:
Comatrol
www.comatrol.com
Turolla
www.turollaocg.com
Hydro-Gear
www.hydro-gear.com
Daikin-Sauer-Danfoss
www.daikin-sauer-danfoss.com
Bent Axis Motors
Closed Circuit Axial Piston
Pumps and Motors Displays
Electrohydraulic Power
Steering Electrohydraulics
Hydraulic Power Steering
Integrated Systems
Joysticks and Control
Handles Microcontrollers and
Software Open Circuit Axial Piston
Pumps Orbital Motors
PLUS+1® GUIDE
Proportional Valves
Sensors
Steering
Transit Mixer Drives
Danfoss Power Solutions is a global manufacturer and supplier of high-quality hydraulic and electronic components. We specialize in providing state-of-the-art technology and solutions that excel in the harsh operating conditions of the mobile off-highway market. Building on our extensive applications expertise, we work closely with our customers to ensure exceptional performance for a broad range of off-highway vehicles.
We help OEMs around the world speed up system development, reduce costs and bring vehicles to market faster.
Danfoss – Your Strongest Partner in Mobile Hydraulics.
Go to www.powersolutions.danfoss.com for further product information.
Wherever off-highway vehicles are at work, so is Danfoss. We offer expert worldwide support for our customers, ensuring the best possible solutions for outstanding performance. And with an extensive network of Global Service Partners, we also provide comprehensive global service for all of our components.
Please contact the Danfoss Power Solution representative nearest you.
Local address:
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
©
Danfoss | January 2018 BC00000392en-US0103
Loading...