N
Data Sheet
Danfoss Link™ MPB with Danfoss Link™ SCM or
with Danfoss Link™ HC
Applications
System
The Danfoss Link™ SCM (Simple Communication
Module) is an electronic controller for turning the
AWAY function ON/OFF in a Danfoss Link™ system.
The Danfoss Link™ MPB (Mobile Phone Butler)
can be connected to the Danfoss Link™ SCM in
order to remotely control the Danfoss Link™ SCM
via text messaging. Other ON/OFF devices; sensors, manual switches, etc. can also be connected
to the Danfoss Link™ SCM.
The AWAY Function sets a fixed temperature for
all rooms. The AWAY temperature can only be set
on the Danfoss Link™ CC (Central Controller), default setting is 15 °C.
Smartphone app
For Android phones and iPhones you can download the Danfoss Link™ ButlerApp for easy communication with the Danfoss Link™ MPB.
Make sure the right
Danfoss Link™ CC software version is applied. Correct version:
2.5.57 or higher.
Fig. 1: Danfoss Link™ MPB with Danfoss Link™ SCM
Fig. 2: Danfoss Link™ MPB with Danfoss Link™ HC
Danfoss Heating Solutions VDFZG102 © Danfoss 12/2012 1
Data Sheet Danfoss Link™ MPB with Danfoss Link™ SCM or with Danfoss Link™ HC
Ordering
Technical Specifications
for Danfoss LinkTM SCM
Product Code no.
Danfoss Link™ HC (Hydronic Controller) 014G0100
Danfoss Link™ MPB (Mobile Phone Butler) 014G0102
Danfoss Link™ SCM (Simple Communication Module) 014G0105
Type Specifications
Operating voltage 8-32 V DC
Operation voltage (net adapter) 220-240 V~, 50 Hz
Standby consumption 0.9 W
Ambient temperature 0 °C to +45 °C
Transport temperature -10 °C to +60 °C
Transmission frequency 868.42 MHz
Transmission range in normal buildings Up to 30 m
Transmission power Max. 1 mW
Pollution degree 2
Ball pressure test temperature 75 °C
Software classification Class A
IP class 20
Dimensions 80 x 80 x 30 mm
Technical specifications
for Danfoss Link™ MPB
Technical Specifications
for Danfoss LinkTM HC
Type Specifications
Operating voltage 12 V DC
Operation voltage (net adapter) 90 - 264 V AC
Standby consumption Max. 0.5 W
Contact load capacity (max) 0.5 A - 250 V AC
1 A - 30 V DC
Ambient temperature -5 to +55 °C when humidity is < 95%
Transport temperature -30 to +70 °C when humidity is < 90%
Transmission frequency 900 MHz, 1800 MHz
Transmission power Max. 2 W
Pollution degree Residential (pollution degree 2)
Software classification A
IP class 20
Dimensions (l x h x d) 87.5 mm x 90 mm x 40 mm
Weight 0.136 kg
Type Specifications
Supply voltage 230 V AC
Number of outputs and voltage 10/24 V DC
Ambient temperature 0 to +50 °C
Transport temperature 0 to +50 °C
Transmission frequency 868.42 MHz
Transmission range (up to) 30 m (in normal buildings)
Transmission power Max. 1 mW
Max. running load of actuator output 35 VA in total for all outputs
Max. load for pump relay 230 V and 8 A / 2 A (inductive)
2 VDFZG102 © Danfoss 12/2012 Danfoss Heating Solutions
Data Sheet Danfoss Link™ MPB with Danfoss Link™ SCM or with Danfoss Link™ HC
Type Specifications
Max. load for boiler relay 230 V and 8 A / 2 A (inductive)
Protection class IP 30
Mains cable 1.5 m
Weight 700 g
Dimensions (l x h x d) 325 mm x 78 mm x 47 mm
Danfoss Heating Solutions VDFZG102 © Danfoss 12/2012 3
Data Sheet Danfoss Link™ MPB with Danfoss Link™ SCM or with Danfoss Link™ HC
Danfoss A/S
Heating Solutions
Haarupvaenget 11
8600 Silkeborg
Denmark
Phone: +45 7488 8000
Fax: +45 7488 8100
Email: heating.solutions@danfoss.com
www.heating.danfoss.com
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective
companies. Danfoss Heating Solutions and the Danfoss Heating Solutions logotype are trademarks of Danfoss A/S. All rights reserved.
4 VDFZG102 © Danfoss 12/2012 Danfoss Heating Solutions
Loading...