Danfoss Link Connect Thermostat Data sheet

Data Sheet

Danfoss Link™ Connect Thermostat

Application

Ordering

Connect is an electronic radiator thermostat for residential use with a Danfoss Link™ system (for further information on the system, please refer to separate data sheet for Danfoss Link™ Central Controller).

Connect is easy to install and is supplied with adapters for all thermostatic valves manufactured by Danfoss and most other radiator valve manufacturers.

Connect is battery powered, compact and very easy to operate with only three buttons on the front and wireless connection to Danfoss Link™ Central Controller.

Connect features

(in a Danfoss Link™ system):

•Provides a high level of comfort

•Energy saving

•Easy to install

•Easy to operate with only three buttons

•Variable set points and up to 3 set-back periods per day

•PID control (precise temperature regulation)

•Adaptive learning

•Weekly programs with adjustable temperature set-backs

•Min./max. temp. limitation

•Open-window function

•At home/Away modes

•Vacation mode

•Valve exercise function

•Pause function

•Child lock

•Backlit display

•Battery lifetime up to 2 years

Adapters (included)	Languages	Code no.
Danfoss RA, RAV, RAVL, M30	DE, FR, IT	014G0540
Danfoss RA, RTD, M30	CZ, PL, UK	014G0541
Danfoss RA, M30	FI, EE, LV, LT, UK	014G0542
Danfoss RA, RAV, RAVL, M30, M28 MMA	SE	014G0543
Danfoss RA, RAV, RAVL, M30	DK	014G0544
Danfoss RA, M30, M28 HERZ	IT, DE	014G0545
Danfoss RA, M30, M28 COMAP	FR	014G0546
Danfoss RA, M30, M28 ORKLI	ES	014G0547

© Danfoss HS | 10/2016 | VDLTA202

1

Data Sheet	Danfoss Link ™ Connect Thermostat
Specifications
	Thermostat type	Programmable electronic radiator valve controller
	Recommended use	Residential
	Actuator	Electromechanical
	Display	Grey digital with backlight
	Software classification	A
	Temperature Control	PID
	Transmission frequency / range	868.42 MHz / up to 30 m
	Power supply	2 x 1.5 V alkaline AA batteries
	Power consumption	3 μW in standby, 1.2 W when active
	Battery life	Up to 2 years
	Low batteri signal	Battery icon will flash in display.
		If battery level is critical, the whole display will flash.
	Ambient temperature range	0 to 40 °C
	Transportation temperature range	-20 to 65 °C
	Maximum water temperature	90 °C
	Temperature setting range	4 to 28 °C
	Measurement interval	Measures temperature every minute
	Clock accuracy	+/- 10 min/year
	Spindle movement	Linear, up to 4.5 mm, max. 2 mm on valve (1 mm/s)
	Noise level	<30 dBA
	Safety classification	Type 1
	Open-window function	Activated at temperature decrease of approx. 0.5 °C over 3 min.
	Weight (incl. batteries)	177 g (with RA adapter)
	IP class	20 (not to be used in hazardous installations or in places where it
		will be exposed to water)
	Approvals, markings etc.
			Intertek
	Tested for safety and EMC requirements as specified in EN 60730-1, EN 60730-2-9 and EN 60730-2-14.

© Danfoss HS | 10/2016 | VDLTA202

2