Danfoss Link BR Boiler Relay Data sheet

Data Sheet

Danfoss Link™ BR Boiler Relay

Application

Ordering

Technical Data

The Danfoss Link™ BR boiler relay is a device for turning gas and oil boilers ON / OFF depending on heating demands.

The BR boiler relay is part of the Danfoss Link™ system, which is used for wireless linking and controlling of heating systems in residential and light commercial buildings.

The BR boiler relay can be part of a Z-wave network consisting of products form various manufacturers.

The Boiler Relay is a mains powered device and will act as a repeater in order to improve the wireless performance of the Z-wave network.

Product Code no.

Danfoss Link™ BR boiler relay 014G0272

Typ e Specications

Operation voltage 230 V~, 50 Hz

Standby consumption 1.6 W

Load 3 amps resistive, 1 amp inductive

Rated impulse 2.5 kV

Switching Typ e 1B

Regulation ON / OFF

Ambient temperature 0 °C to +45 °C

Transmission frequency Wireless Z-wave 868.42 MHz

Transmission range in normal buildings Up to 30 m

Transmission power Max. 1 mW

Pollution situation Degree 2

Ball pressure test 75 °C

Software classication Class A

IP class 40

Dimensions 84 x 84 x 30 mm

Data Sheet Danfoss Link™ BR Boiler Relay