Data Sheet
Ikargo2 Transmitter
Remote Control
This remote control Transmitter is highly
customizable with many features and accessories.
These remote controls also support the operator with
an ergonomic design that allows for safe and efficient
operation.
Features
•
High-sensitivity two-step push button
•
Multi-band Radio with Full-Duplex
communication
•
External removable EEPROM SIM
module
•
Frequency management against
interferences
Benefits
•
Highly customizable
•
Easy and fast maintenance
•
High resistance to impacts
•
Improved ergonomics
•
Screen display
Applications
•
Used in lifting applications
•
Used in crane applications
Comprehensive technical literature is
online at www.danfoss.com
©
Danfoss | January 2022 AI378368634988en-000201 | 1
Technical Data
Specification Value
Stop function (400 - 900 MHz) Cat. 3-PLd
Ingress Protection IP65/NEMA4
Anti-condensation system N/A
Frequency bands - ERP 433.050 to 434.040 MHz; ERP<1 mW
434.040 to 434.790 MHz; ERP<10mW
869.700 to 870.000 MHz; ERP<5 mW
902.000 to 928.000 MHz; ERP<1mW
Range Line of sight (guaranteed) 100m
Main mechanisms Pushbutton (10) + Multikey(1) + STOP
Auxiliary mechanisms N/A
Removable EEPROM External
Battery model BT11K
Battery life 8 hours (100% duty cycle)
Response Time 100ms
Operating temperature -20° to 70° C (-4° to 158° F)
Storage Temperature Range (24h) -25ºC to 75ºC (-13ºF to 167ºF)
Storage Temperature Range (long periods) -25ºC to 55ºC (-13ºF to 131ºF)
RElative humidity max. 95% without condensation
Weight (with battery) 450g
Dimensions LxWxH mm 252x68x60
Harness Hand/shoulder strap
Display Yes
Options
Cable connection N/A
Range limiter Yes
Associated receivers (400 - 900 MHz) R06, R13 B, R13 F, R70
BC70K battery charger
Specification Value
AC power supply 110-230V, 50/60Hz, ± 10%,
automatic switching
DC power supply, nominal 12-24V
BT11K battery
Specification Value
Voltage 3.7V
Capacity 1130 mAh Li-ion
Charging temperature 0°C to 45°C
Discharge temperature -20°C to 60°C
Charging mode Fast (<2.5h and intelligent)
Weight 23g
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2 | © Danfoss | January 2022 AI378368634988en-000201