Danfoss HRB rotary valves are primarily designed
for regulation of flow temperature in heating
systems where a certain leakage can be accepted
and where a defined control characteristic is not
required.
HRB rotary valves can be used in combination
with electric actuators AMB 162 and AMB 182.
Features:
• Lowest leakage in class
• Unique position indicator
(visible also when actuator in mounted)
Before valve mounting pipes have to be cleaned
and free from abrasion. Mechanical loads on
valve body caused by the pipes are not allowed.
It is recommended to install a strainer into
application to avoid damaging controlling
components.
HRB 4
Flow
From boiler
Back to boiler
Return
Connection
HRB 3 can be used as a mixing valve, diverting
valve and in connection with heat exchangers
where a certain leakage can be accepted.
HRB 4 operates according to the double shunt
principle i.e. the water from the boiler is mixed
with a certain portion of the water in the return.
In this way the water which goes to the boiler
reaches a higher return temperature than by
using 3-way valves. This means that the risk of
corrosion in oil and solid fuel boilers is reduced.
Danf
already on order pro
All trademarks in this material are property of the respec
Data sheet Rotary valves HRB 3, HRB 4
oss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
vided that such alterations can be made without subsequential changes being necessaryeady agreed.
8 | VD.LH.B5.02
tive companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.