Danfoss HCS6101-3 Installation guide

Installation and Setting Instructions

Electronic Programmable and Non-Programmable Fan Coil Thermostats
6000 series with independent fan common

Speci cation

Power supply: 24 volt powered models - 20-30 Vac, 50/60Hz
230 volt powered models - 210-250 Vac, 50/60Hz
Temperature range: Heating stage - O -5-30°C
Cooling stage - 16-37°C-O
Temperature accuracy: ± 0.5°C
Deadzone adjustment: 1, 2, 3 or 4°C
Voltage rating of contacts: 20-250 Vac, 50/60Hz
Current rating of contacts: 10mA - 3A resistive, 1A inductive
Switching action: Voltage free SPDT contacts, Type 1B
Time accuracy: ± 1 minute
Memory retention: 24V & 230V models: 15 days
Battery model: 1 minute for battery change
IP rating: IP30
Dimensions (mm): 130 x 100 x 38 (W x H x D)
Control pollution situation: Degree 2
Rated impulse voltage: 2.5 KV
Ball pressure test: 75°C

Applications

HCS & HCST Models

Ordering Details

Features 24 volt 230 volt

Type Co de Type Co de

Heat or cool operation, selectable at time of installation

3-speed fan output HCS6101-3 087N722500

Heat & cool systems (with auto changeover), for use in 4-pipe systems

3-speed fan output HCT6113-3 087N759326

HC & HCT Models

Wiring

HCS & HCST Models with 3 speed fan
(Heat or Cool)

HC & HCT Models with 3 speed fan
(4 pipe auto change-over)

1

Installation

1. Thermostat Location

3. Separating the Wallplate

2. Unpacking the Thermostat

4. Fitting the Thermostat to the Wall 5. Wiring Access - Incorrect

6. Wiring Access - Correct 7. Cable Size

Max cable size

2

1.5mm

2