Danfoss Graphical LCP Adapter Installation guide

Installation Instructions

Graphical LCP Adapter

Use the adapter to connect the VLT® Control Panel LCP 102 to
the frequency converter via a cable.

Items supplied

Code number of the graphical LCP adapter is 132B0281. The
kit includes:

GLCP adapter.

•

2 screws.

•

Code number of the LCP remote mounting kit is 130B1113.
The kit includes:

Graphical LCP.

•

Fasteners.

•

3 m (9.8 ft) cable.

•

Gasket.

•

Mounting the Option

Mount the option according to Illustration 1.1.

Illustration 1.1 Mounting the Adapter

Danfoss A/S © 11/2015 All rights reserved. MI06G202

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on
order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss
and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

Danfoss A/S
Ulsnaes 1
DK-6300 Graasten
vlt-drives.danfoss.com

MI06G202132R0205 11/2015

*MI06G202*