Data Sheet
Gas detection unit
Accessory
Duct Mounting Set - for gas detectors GD - basic and premium units
Next generation gas detection for industrial refrigeration
The duct mounting set consists of a sampling tube with hose and adapter for gas detectors with plastic sensor head - basic and premium units.
Features:
• Easy to use
• Perfect coverage of the sensor head
• Double pipe can be cut to length for adaptation to the duct diameter
AI304330175443en-000201
Gas detection unit, Accessory
Product speci€cation
Material speci€cation
Figure 1: Material speci€cation
22 mm (0,87 in) |
|
End cap |
|
|
|
|
|
||
70 mm (2,75 in) |
|
|
|
|
Saw off |
|
After cutting to |
|
|
only here! |
|
length, attach the |
|
|
|
|
end cap here! |
|
|
Saw off |
|
After cutting to |
|
|
only here! |
|
length, attach the |
|
|
|
|
end cap here! |
|
|
Saw off |
|
After cutting to |
|
|
only here! |
|
length, attach the |
|
|
|
|
end cap here! |
|
|
5 mm(0,19 in) |
H |
L |
<![if ! IE]> <![endif]>in) |
|
| <![if ! IE]> <![endif]>32 mm (1,25 |
||||
|
FLOW |
|||
|
70 mm(2,75 in) |
|
||
|
89 mm(3,5 in) |
|
||
Sampling set
Gas sampling |
Via sampling tube / connecting hose |
|
Flow rate |
Min. 5000 m/h (3.1 mph), max. 20,000 m/h (12.4 mph) |
|
Air duct diameter |
Min. 0.1 m (3.94 in.), max. 1.0 m (39.37 in.) |
|
Length of sampling tube |
250 mm (9.84 in.), adaptable to the duct diameter by cutting to length: |
|
192 mm (7.56 in.), 133 mm (5.24 in.) or 77 mm (3.03 in.)* |
||
|
||
Hose length |
2 x 1000 mm (39.37 in.) |
|
|
Arrow at the sampling set in •ow direction |
|
Assembly |
Always install in the centre of the duct |
|
|
Keep a minimum distance of at least 1000 mm to duct bends etc. |
|
|
|
© Danfoss | Climate Solutions | 2021.02 |
AI304330175443en-000201 | 2 |
Loading...