Danfoss FH 1-layer PE-RT type II pipes Data sheet

Data Sheet

FH 1-layer PE-RT type II pipes

Application

Ordering

Technical data

The Danfoss FH 1-layer PE-RT type II pipe is a high quality 1-layer floor heating pipe without an EVOH oxygen barrier.

The octen side chains of the molecular structure of the PE-RT give it a similar effect to that of the linked PE. The PE-RT material is a highly flexible material that makes installation easy and comfortable.

Unlinked polyethylene with Raised Temperature resistance (PE-RT) is used, in accordance with the standard GB/T28799.2-2012.

Product	Size	Length	Order Number
FH 1-layer PE-RT type II pipe	16 x 2.00 mm	340 m	088X0807
FH 1-layer PE-RT type II pipe	20 x 2.00 mm	300 m	088X0808
Accessories
Product		Size	Order Number
Compression fitting for manifold		16 x 2.00 mm	013G4156
Compression fitting for manifold		20 x 2.00 mm	013G4160
Screw coupling		16 x 2.00 mm	088X0025
Screw coupling		20 x 2.00 mm	088X0027

Pipe size	16 x 2.00 mm		20 x 2.00 mm
Material	PE-RT, type II
Colour	Orange
Max. working pressure	8 bar		6 bar
Test pressure	12 bar		9 bar
Max. flow temperature (short term)	100° C
Max. working temperature		60° C
Minimum bending radius with bending springs	128 (8 x Od)*		160 (8 x Od)*

* Od = Outside diameter

VDLLA102

© Danfoss | FHH | 2015.09 | 1

Pressure loss
	Mass flow, kg/h

1000
800																			91
																				.
																		0		0
																		0	.
600																		.
																	0	8
																6	.
																	7
																0
																.
400																0
																.
															4	5
															0
															.
															0
							1								.
															3
200
												2
												0
												.
										mm
100									/16		mm
								0
							2
						0	ø	20/15
80
						.	ø
						1
60												mm
											2
											/1
										Ø16
40
20
10						7 8 9 10 1									7 8 9 10 2							7 8 9 10 3
1	2	3	4	5	6			2			3	4	5	6		2	3	4		5	6
															100							1000

1: Flow velocity (m/s)

Pressure loss, kPa/m

Water temperature: 40°C.

Danfoss A/S

Floor Heating Hydronics • Ulvehavevej 61 • DK-7100 Vejle • Denmark • Phone: [phone] • Fax: [phone] [e-mail] • www.floorheating.danfoss.com

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.

All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2 | © Danfoss | Danfoss | FHH | 2015.09

VDLLA102