Danfoss FH 1-layer PE-RT pipes Data sheet
Data Sheet
FH 1-layer PE-RT pipes
Application
Ordering
Accessories
The Danfoss FH 1-layer PE-RT pipe is a high quality
1-layer floor heating pipe made from PE-RT type 1
without an EVOH oxygen barrier.
The octen side chains of the molecular structure of
the PE-RT give it a similar effect to that of the linked
PE. The PE-RT material is a highly flexible material t hat
makes installation easy and comfortable.
The unlinked polyethylene with its Raised
Temperature resistance (PE-RT) is used, in accordance with standard GB/T 28799-2012.
Product Typ e Size Length Order Number
FH 1-layer PE-RT pipe FH-CPD 16 × 2,00 mm 500 m 088X0801
FH 1-layer PE-RT pipe FH-CPF 20 × 2,30 mm 500 m 088X0805
FH 1-layer PE-RT pipe FH-CPO 20 × 2,20 mm 300 m 088X0806
Product Size Order Number
Compression fitting for manifold 16 × 2,00 mm 013G4156
Compression fitting for manifold 20 × 2,25 mm 013G4093
Compression fitting for manifold 20 × 2,00 mm 013G 4160
Screw coupling 16 × 2,00 mm 088X0025
Screw coupling 20 × 2,25 mm 088X0026
Screw coupling 20 × 2,00 mm 088X0027
Technical data
© Danfoss | FEC | 2020.09
Materials PE-RT (type 1)
Max. working pressure 8 bar
Test pressure 12 b ar
Max. flow temperature (short term) 100 °C
Max. working temperature 60 °C
Minimum bending radius with bending springs
Pipe dimension mm Manual pipe bender radius mm]
16 80 (5 × Od)
20 100 (5 × Od)
Od = Outside diameter
AI170386460160en-CN0401 | 1
Pressure loss
3
100
1000
1000
Mass flow, kg/h
800
600
400
200
100
80
60
40
20
10
123456789102345678910
Flow velocity (m/s)
0.2
20/16 mm
ø
0.1
20/15 mm
ø
16 /12 mm
ø
12
Water temperature: 40 °C.
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
2345678910
Pressure loss
kPa/m
2 | © Danfoss | FEC | 2020.09
AI170386460160en-CN0401
Loading...