Danfoss eco Intelligent Radiator Thermostat Installation guide
Installation and User Guide
eco Intelligent Radiator Thermostat
Installation Guide eco Intelligent Radiator Thermostat
Installation Guide
1. Installation
1.1 Identify your eco thermostat.........................................................4
1.2 In the package ......................................................................4
1.3 Overview of valve adapters ..........................................................5
1.4 Installing the right adapter ..........................................................6
1.5 Inserting the batteries ...............................................................7
1.6 Using the buttons ...................................................................7
1.7 Setting time and date for the rst time ...............................................8
1.8 Installing eco .......................................................................8
1.9 Automatic adjustments..............................................................9
1.10 Removing eco ......................................................................9
1.11 Resetting eco to default settings................................................... 10
1.12 Removing an adapter from eco .................................................... 10
2. Technical specications.................................................................11
2
06/2015 VIJPE102 Danfoss Heating Solutions
User Guide eco Intelligent Radiator Thermostat
User Guide
3. Display and menus
3.1 Home Screen ..................................................................... 12
3.2 Programme menu................................................................. 12
3.3 Function menu.................................................................... 13
3.4 Advanced menu .................................................................. 14
3.5 Pause ............................................................................ 15
4. Temperature and programme settings
4.1 Setting the comfort temperature .................................................. 16
4.2 Default programme settings ...................................................... 17
4.3 Adjusting programme setting P1 .................................................. 18
4.4 Adjusting programme setting P2 .................................................. 19
4.5 Creating a Travel programme ...................................................... 19
4.6 Overrule a Travel programme (early return) ........................................ 20
4.7 Changing an existing Travel programme ........................................... 21
4.8 Deleting a Travel programme ...................................................... 21
4.9 Adjusting the Pause temperature .................................................. 22
5. Additional settings
5.1 Setting the time...................................................................23
5.2 Deactivating automatic daylight saving time....................................... 23
5.3 Setting the Heating Control ....................................................... 24
5.4 Automatic valve exercising ........................................................25
5.5 Activating intelligent Control (Forecast) ............................................ 25
5.6 Limiting the temperature setting range ........................................... 26
5.7 Child Lock ........................................................................ 26
5.8 Pause ............................................................................ 26
5.9 Open-window function ........................................................... 27
6. Safety precautions...................................................................... 27
7. Disposal ................................................................................ 27
Danfoss Heating Solutions VIJPE102 06/2015
3
Installation Guide eco Intelligent Radiator Thermostat
1. Installation
1.1 Identify your eco thermostat
eco comes in several versions to meet the demands of
dierent markets.
You identify your version by the code number on the box label.
Adapters for a range of dierent valves types are available as accessories, see chapter 1.3.comes in several versions to meet the
demands of dierent markets. To identify your version, see the code
number on the box label.
Adapters for a range of dierent valves types are available as accessories, see chapter 1.3.
Code no. Version characteristics Quick guide languages
014G0065
014G0051
014G0064
Incl. pre-mounted RA adapter
(Default MODERATE and FORECAST ON in software setting)
Incl. RA + M30 x 1.5 adapters
(Default MODERATE and FORECAST OFF in software setting)
Incl. RA + M30 x 1.5 adapters, Forecast disabled as default
(Default QUICK and FORECAST OFF in software setting)
UK/DK/SE/FI/LT/EE/LV/IS
UK/DK/SE/FI/LT/EE/LV/IS
UK/DE/FR/PL/NL/NO/CZ/
HU/SK/SI/ES/IT
1.2 In the package
eco are supplied with the adapters as listed above. In addition each pack contains:
eco sensor Quick Guide Allen key, 2 mm Alkaline AA batteries
4
06/2015 VIJPE102 Danfoss Heating Solutions
34
26
Installation Guide eco Intelligent Radiator Thermostat
1.3 Overview of valve adapters
Adapters for a wide range of dierent valve types are available as accessories.
Adapter type Code no. Adapter Valve
For Danfoss
RA valves
For M30 x 1.5 (K)
valves
For Danfoss
RAV valves
For Danfoss
RAVL valves
For Danfoss
RTD valves
014G0251
014G0252
014G0250
014G0253
For M28 valves:
- MMA 014G0255
- Herz 014G0256
- Orkli 014G0257
- COMAP 014G0258
Danfoss Heating Solutions VIJPE102 06/2015
5
Installation Guide eco Intelligent Radiator Thermostat
1.4 Installing the right adapter
Adapter for RA valves
1. 2.
Place the RA adapter on the valve as shown. Tighten the adapter with the 2 mm Allen key.
Adapter for M30 x 1.5 (K) valves
1. 2.
Place the K adapter on the valve as shown. Hand-tighten the K adapter (max. 5 Nm).
Adapter for RAV valves (accessory)
1. 2.
Click the inner adapter on the valve. Hand-tighten the outer adapter (max. 5 Nm).
Adapter for RAVL valves (accessory)
1. 2.
Click the inner adapter on the valve. Hand-tighten the outer adapter (max. 5 Nm).
6
06/2015 VIJPE102 Danfoss Heating Solutions
Installation Guide eco Intelligent Radiator Thermostat
Adapter for RTD valves (accessory)
1.
Place the RTD adapter on the valve as shown. Hand-tighten the RTD adapter (max. 5 Nm).
Adapters for M28 valves (accessories)
Please follow the instructions supplied with the valve adapter for the specific M28 valve.
2.
1.5 Inserting the batteries
Remove the battery cover and insert two AA batteries. Make sure the
batteries are correctly oriented.
Rechargeable batteries must not be used.
When replacing batteries the programme settings will be preserved,
but after two minutes the settings for time and date are reset.
The low battery symbol is displayed approx. one month before the
batteries run out.
After approx. two weeks the symbol will ash 14 times from 19:00
to 21:00 hrs.
Before the batteries run out eco will leave the valve in Frost Protection
position to protect the heating system from damage.
1.6 Using the buttons
eco has two arrow buttons which allow you to navigate the display
and the menus and to set the temperature.
The middle button is used to select and conrm.
If the display is o, press either button to activate the display.
Danfoss Heating Solutions VIJPE102 06/2015
7
Installation Guide eco Intelligent Radiator Thermostat
1.7 Setting time and date for the rst time
1. 2.
When the batteries are installed the time
ashes on the display - 23:59.
a. Set hours with , press to confirm.
b. Set minutes with , press to confirm.
c. Set date with , press to confirm.
1.8 Installing eco
1. Note! Activate Installation Mode 2.
Ensure you are in Installation Mode before you
mount eco. If not, press for 4 seconds.
3. 4.
When ashes, press to confirm your
settings.
The display now switches to the Installation
Mode a large M flashes on the screen.
A large M is flashing in the display to indicate
that Installation Mode is activated.
Screw eco onto the adapter and tighten by
hand (max. 5 Nm).
While slightly pressing forward, turn eco
clockwise untill it locks, then tighten.
8
06/2015 VIJPE102 Danfoss Heating Solutions
Press for 4 seconds to fix eco.
Installation Guide eco Intelligent Radiator Thermostat
1.9 Automatic adjustments
When eco is installed it will automatically begin to adjust itself to your heating system.
During this process you might experience that the thermostat reacts slowly or turns the heat up
and down by itself. This is normal and a necessary part of the adjustment process.
1. Adjusting to the valve
During the first night of operation eco will shut off the radiator heat and then open again to detect
the exact opening point of the valve. This will allow eco to control the heat as efficiently as possible. If necessary, the procedure is repeated once a night for up to a week.
2. Intelligent Control (Forecast)
If you activate Intelligent Control eco learns during the first week of operation when it is necessary
to start heating the room in order to reach the correct temperature at the correct time.
The intelligent control will continuously adjust the heating time compared to seasonal temperature changes. To activate Intelligent Control see chapter 5.5.
Using Saving Program requires that your heating system has enough heat for a short period during
heat up. If your experience problems you should contact your installer.
1.10 Removing eco
1. 2.
Activate Installation Mode: Press for 4
seconds. When M flashes, press .
3. 4.
Remove the battery cover and the batteries. Insert the Allen key or similar into the hole to
Danfoss Heating Solutions VIJPE102 06/2015
A large M is flashing in the display to indicate
that Installation Mode is activated.
lock the adapter ring. Turn counterclockwise
to unscrew eco from the adapter.
9
Loading...