Danfoss ECmat Aqua Data sheet

Data Sheet
Danfoss ECmat™ Aqua
Hot-water fl oor heating mat
Application
Ordering
Danfoss ECmat Aqua is a hot-water  oor heating mat with low construction height (approximately 10 mm), which makes it especially suitable for ren­ovation jobs in existing buildings.
The capacity of your Danfoss ECmat Aqua installa­tion is strongly dependent on the capacity of the circulation pump. Please consult your plumber to determine the capacity of your heating system.
Each room with  oor heating should be equipped with its own thermostatic room temperature con­trol, such as a Danfoss RTL valve with TH function (not included).
Product Code no.
Danfoss ECmat™ Aqua, 088L9280 Manifold for one mat 088L9282 Manifold for two mats 088L9284 Manifold for three mats 088L9286 Repair kit 088L9288
Technical speci cations
Width 50 cm
Length 6 m
Height 8 mm
Extra pipe for return  ow 7 m
Adheisive mesh Yes
Colour Blue
Pipe type PE-RT (5 layered pipe)
Oxygen Permeability according to DIN 4726
Certi ed according to DIN 4721 and DIN 16833
Warranty (pipe) 10 years
VDHWA102
© Danfoss | FHE | 2015.10 | 1
Data Sheet Danfoss ECmat™ Aqua
3 m² oor area
Only oor heating
Mixed systems
New build
Numbers Item no. Description
1 pcs 088L9280 Danfoss ECmat Aqua
1 pcs 088L9282 Manifold for one mat
1 pcs 003L1015
1 pcs 003L10 40 FJVR return temperature limiting sensor
1 pcs 088L9280 Danfoss ECmat Aqua
1 pcs 088L9282 Manifold for one mat
1 pcs 003L1001
1 pcs 013G2990
1 pcs 088L9280 Danfoss ECmat Aqua
1 pcs 088L9282 Manifold for one mat
1 pcs 003L1000 FHV-R set: return temperature limiter valve
1 pcs 003L10 40 FJVR return temperature limiting sensor
FHV-R set: return temperature limiter valve with air vent, bleed key and drain tap
FHV-R set: return temperature limiter valve with air vent, bleed key and drain tap
RA 2000 room sensor with frost protection, limiting and locking of temperature set-point
with air vent, bleed key and drain tap
6 m² oor area
Only oor heating
Mixed systems
New build
Numbers Item no. Description
2 pcs 088L9280 Danfoss ECmat Aqua
1 pcs 088L9284 Manifold for two mats
1 pcs 003L1015
1 pcs 003L10 40 FJVR return temperature limiting sensor
2 pcs 088L9280 Danfoss ECmat Aqua
1 pcs 088L9284 Manifold for two mats
1 pcs 003L1001
1 pcs 013G2990
2 pcs 088L9280 Danfoss ECmat Aqua
1 pcs 088L9284 Manifold for two mats
1 pcs 003L1000 FHV-R set: return temperature limiter valve
1 pcs 003L10 40 FJVR return temperature limiting sensor
FHV-R set: return temperature limiter valve with air vent, bleed key and drain tap
FHV-R set: return temperature limiter valve with air vent, bleed key and drain tap
RA 2000 room sensor with frost protection, limiting and locking of temperature set-point
with air vent, bleed key and drain tap
2 | © Danfoss | FHE | 2015.10
VDHWA102
Data Sheet Danfoss ECmat™ Aqua
9 m² oor area
Only oor heating
Mixed systems
New build
Numbers Item no. Description
3 pcs 088L9280 Danfoss ECmat Aqua
1 pcs 088L9286 Manifold for three mats
1 pcs 003L1015
1 pcs 003L10 40 FJVR return temperature limiting sensor
3 pcs 088L9280 Danfoss ECmat Aqua
1 pcs 088L9286 Manifold for three mats
1 pcs 003L1001
1 pcs 013G2990
3 pcs 088L9280 Danfoss ECmat Aqua
1 pcs 088L9286 Manifold for three mats
1 pcs 003L1000 FHV-R set: return temperature limiter valve
1 pcs 003L10 40 FJVR return temperature limiting sensor
FHV-R set: return temperature limiter valve with air vent, bleed key and drain tap
FHV-R set: return temperature limiter valve with air vent, bleed key and drain tap
RA 2000 room sensor with frost protection, limiting and locking of temperature set-point
with air vent, bleed key and drain tap
VDHWA102
© Danfoss | FHE | 2015.10 | 3
Danfoss A/S
Floor Heating Electric • Ulvehavevej 61 • DK-7100 Vejle • Denmark • Phone: +45 7488 8500 • Fax: +45 7488 8501 EH@danfoss.com • http://electricheating.danfoss.com
Danfoss can accept no responsibilit y for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specications already agreed. All trademarks in this material are proper ty of the respective companies. Danfoss and the Danfoss logotype are trademark s of Danfoss A/S. All rights reser ved.
4 | © Danfoss | FHE | 2015.10
VDHWA102
Loading...