Danfoss ECiceguard 18 Data sheet

Product

YEAR

WARRANTY

Data Sheet

Product speciﬁcations

ECiceguard 18 Ready-made

The ECiceguard is readymade self-limiting parallel heating cable that is used for ice and snow melting on roofs, in gutters and downpipes (UV-resistant).

ECiceguard heating cables should not be in direct contact with bitumen. The self-limiting capability of the cable ensures that the output of the cable increase or

decrease according to ambient temperature. The heating cable is ﬂexible and easy to install as it can be cut to length at site and

installed directly on to the roof and gutter system. All self-limiting heating cables must be over-temperature protected by a thermostat,

as the output will decrease, but never be zero, and be protected by a RCD with a maximum trip current of 30 mA.

Beneﬁts

• Easy to install

• Cut to length on site

• Ready-made lengths

Approvals:

Standard compliance:

• SS 4242411

Types: ECiceguard 18 Ready-made

Item no. Cable length Nominal output @ 10 °C Cold lead EAN no.

088L6575 2 m 36 W 5 m 5703466247020 088L6576 4 m 72 W 5 m 5703466247037 088L6577 6 m 108 W 5 m 5703466247044 088L6578 8 m 144 W 5 m 5703466247051 088L6579 10 m 180 W 5 m 5703466247068 088L6580 15 m 270 W 5 m 5703466247075 088L6581 23 m 414 W 5 m 5703466247082 088L6582 30 m 540 W 5 m 5703466247099 088L6583 50 m 900 W 5 m 5703466247105

Nominal voltage 230 V AC Nominal output 18 W/m @ 10 °C Output tolerance (min-max) 19 - 25 W/m @ 10 °C Maximum permissible use temperature 65 °C, powered

85 °C, unpowered Minimum installation temperature -5 °C Cable dimensions 13,2 X 6,1 ± 0,3 mm Outer sheath Black UV protected, TPE Minimum braid coverage 70% Maximum resistance protective braid 10 Ω /Km Cold lead 5 m DTCL, 3G 1,5mm² Bending Ø, min. 64 mm (Ø to the inside of the cable) IP Class IPX7

Construction

Over jacket

Screen

Insulation

Self limiting heating element

Bus wires, 1,25 mm²

Electrical heating · ©Danfoss AI281660310070en-010106

• Nickel plated copper bus wires

• Radiation Cross-Linked Semiconductive Heating Matrix

• Radiation Cross-Linked Primary Dielectric Insulation

• Tinned copper braid

• Polyoleﬁn over jacket

Maximum heating circuit length on a pipe, with circuit breaker with C-characteristic*

W/m

-60

Pipe temperature (°C)

Switch on

temperature

Power W/m

10 A 16 A 20 A 25 A 32 A

10 °C 20 55 88 110 135 135

0 °C ice water 36 40 64 80 100 105

-10 °C 42 36 58 72 90 100

-20 °C 48 33 52 65 81 100

-30 °C

54 29 46 57 71 90

-40 °C 61 25 40 50 62 80

* Maximum length in ice water or for roof applications is 2 times lower.

ECiceguard 18

Power output characteristic

Output of heating cable installed and measured on a pipe.

-40 -20 0 20 40 60 80

ECiceguard 18 Ready-made

DEVIiceguard™ 18 (G) Ready-made