Danfoss ECI 10-1, ECI 15-1 Installation guide [da]
INSTRUCTIONS
E
CI 10-1/ ECI 15-1
Montering - Mounting - Montage mm
047C0425
(inch)
Mål - Dimensions - Abmessungen mm (inch)
ECI 10/ ECI 15
047C0425
DK Hvis enhed er monteret vandret reducer strøm med 50%
UK
!
If unit is mounted horizontally derate current by 50%
D Falls Einheit horizontal montiert wird, reduziert sich der
Strom um 50%.
Forbindelse - Wiring - Vedrahtung
75°C
Kabel/
wire* mm2 (AWG) mm2 (AWG)
0.75 - 4 0
(18 - 12) (20 - 16)
2 x 1 2
(2 x 18) (2 x 20 - 18)
0.75 - 6 0
(18 - 10) (20 - 16)
2 x 0.75 - 1.5 2 x 0.5 - 1.5
(
2 x 18 - 14) (2 x 20 - 16)
0.75 - 6 0
(18 - 10) (20 - 16)
2 x 0.75 - 1.5 2 x 0.5 - 1.5
(
2 x 18 - 16) (2 x 20 - 16)
Pozidrive 1
0
.5 Nm max. N.A.
4.4 lb-in max.
4 mm 3
0.5 Nm max. 0.5 Nm max.
4.4 lb-in max. 4.4 lb-in max.
* Use copper conductor only
.5 - 1.5
x 0.5 - 0.75
.5 - 1.5
.5 - 1.5
mm
DK Køleplade skal holdes ren. Luftstrøm må ikke blokeres
UK
!
- Vigtigt: (Overhold max. skruedrejningsmomenter)
- Important: (Observe the maximum screw torque limits)
- Wichtig: (Max. Drehmoment beachten)
Keep heat sink clean. Airflow should not be blocked
D Kühlflächen freihalten. Luftstrom muß ungehindert fließen
A1
- A2
24-230V ≅ 5
037N0064 037N0063
037N0066 037N0065
037N0068 037N0067
*) Not UL approved
-24 V ≡
037N0072*)
UL: Use thermal overload protection as required by the National Electric Code
Maximum surrounding temperature 40°C
© Danfoss | DCS (rja) | 2015-09 IC.PI.C50.I2.51
520B6897
Loading...