Data Sheet
YEAR
WARRANTY
Product specifications
Product
EChotwatt 45
EChotwatt 55
EChotwatt 70
The EChotwatt is a self-limiting heating cable that is used for temperature maintenance
of hot water supply and other fluids that need to maintain a certain temperature.
The self-limiting capability of the cable ensures that the output of the cable
increase or decrease according to ambient temperature. All self-limiting heating
cables must be over-temperature protected by a thermostat, as the output will
decrease, but never be zero , and be protected by a RCD with a maximum trip
current of 30 mA.
EChotwatt ensures hot water in all taps and savings when circulation of the whole
pipe system is unnecessary.
Benefits
• Cut to length on site
• Black version is UV protected
• PVC free
Approvals:
Standard compliance
• DIN VDE 0254: 1994-06
Nominal voltage 230 V AC
Nominal output (min-max):
EChotwatt 45
EChotwatt 55
EChotwatt 70
Outer sheath:
EChotwatt 45
EChotwatt 55
EChotwatt 70
Maximum permissible use temperature
Minimum installation temperature -5 °C
Cable dimensions 11,8 mm × 5,8 mm
Minimum braid coverage 70%
Maximum resistance protective braid 18,2 Ω/K m
Bending diameter, min. 50 mm (Ø to the inside of the cable)
IP Class IPX7
7 W/m @ 45 °C (6,5-9,5 W/m @ 45 °C)
9 W/m @ 55 °C (8,5-13,0 W/m @ 55 °C)
12 W/m @ 70 °C (11,3-15,2 W/m @ 70 °C)
Black, TPE
Green, TPE
Red, TPE
80 °C, powered
100 °C, unpowered
EChotwatt 45 (SLHW-45)
Item no. Typ e Length
088L13 60 EChotwatt 45 Drum, 305 m 305 m 1 570 34 66114 3 60
088L1088 EChotwatt 45 Cut-to-length max 305 m 1 5703466196816
Min-max length
per drum
Number of length
allowed on drum, max
EAN no.
EChotwatt 55 (SLHW-55)
Item no. Typ e Length
088L13 62 EChotwat t 55 Drum, 305 m 305 m 1 5703 4 66114 377
088L1090 EChotwatt 55 Cut-to-length max 305 m 1 5703466196 878
Min-max length
per drum
Number of length
allowed on drum, max
EChotwatt 70 (SLHW-70)
Item no. Typ e Length
088L13 6 4 EChotwatt 70 Drum, 305 m 305 m 1 5703 4 66114 3 84
088L1092 EChotwatt 70 Cut-to-length max 305 m 1 5703466196892
RCD of 30 mA is required, max. 500 m of self-limiting heating cable per RCD.
Electrical heating · ©Danfoss AI281660635072en-010104
Min-max length
per drum
Number of length
allowed on drum, max
EAN no.
EAN no.
Maximum heating circuit length on a pipe, with circuit breaker with C-characteristic
EChotwatt 45
Switch on
temperature
20 °C 10,3 153 231 231 231 231 12,5 108 173 188 188 188 19,5 99 146 146 146 146
10 °C 11,6 144 230 231 231 231 13,5 102 164 188 188 188 21 71 113 142 146 146
-10 °C 14,3 129 203 231 231 231 15,5 93 148 185 188 188 24 45 72 90 113 143
-25 °C 16,3 119 191 231 231 231 17 86 138 173 188 188 26,3 37 64 80 103 133
Power W/m
10 A 16 A 20 A 25 A 32 A 10 A 16 A 20 A 25 A 32 A 10 A 16 A 20 A 25 A 32 A
Power W/m
EChotwatt 55
EChotwatt 70
Power W/m
Power output characteristic
Output of heating cable installed and measured on a pipe.
W/m
35
30
25
20
15
EChotwatt 70
EChotwatt 55
EChotwatt 45
12 W/m
10
Construction
Overjacket
9 W/m
7 W/m
5
5 10 15 20 25 30 35 40 45 50 55 60 65 70
°C
• Nickel plated copper bus wires
• Radiation Cross-Linked Semiconductive Heating Matrix
• Radiation Cross-Linked Primary Dielectric Insulation
Screen
Insulation
Self limiting heating element
Bus wires, 1,25 mm²
• Tinned copper braid
• Polyolefin over jacket
AI281660635072en-010104Electrical heating · ©Danfoss