Danfoss ECdry Touch Kit Data sheet

Data Sheet

ECdry Touch Kit

The ECdry Touch Kit is used to control the ECdry floor heating system designed for floor heating in dry rooms under wooden floorings, parquets and laminates.

The kit consists of the ECtemp Touch thermostat, the NTC Floor Sensor, the Power Supply Cord, the Connection Tool and aluminium Tape.

YEAR

WARRANTY

Product

Product speciﬁcations

Beneﬁts

• All-in-the-box

• Easy installation

• Digital timer thermostat

• Low standby consumption

• Childproof function

Standard compliance

• EN/IEC 60335-2-96 (with ECdry)

• EN/IEC 60730-1 (general)

• EN/IEC 60730-2-7 (timer)

• EN/IEC 60730-2-9 (thermostat)

Operation voltage 220 - 240 V~ 50/60 Hz Standby power consumption max. 0,40 W Resistive load 16A, 3680 W @ 230 V Inductive load Max. 1 A, cos φ = 0,3 Sensing unit NTC 15 kΩ @ 25 °C Ambient temperature 0 °C to 30 °C Frost protection 5 °C to 9 °C (default 5 °C )

Temperature range

Cable specification max 1 x 4 mm2 or 2 x 2,5 mm Ball pressure test temperature 75 °C Pollution degree 2 (domestic use) Controller type 1 C Storage temperature -20 °C to +65 °C IP class 21 Protection class

Dimensions (H/W/D)

Weight 115 g

5 °C to 35°C (room) 5 °C to 45 °C (floor)

Class II - 85 x 85 x 20-24 mm

(in-wall depth: 22 mm)

Type

Item no. Product name Typ e EAN no.

088L0123 Danfoss ECdry Touch Kit With ECtemp Touch timer 5703466238158

Accessories

Item no. Product name Typ e EAN no.

088L0144 Danfoss ECdry Fillermat 2 m² ECdry Fillermat 5703466238233 088L0124 Danfoss ECdry Extension cord 0,25 m ECdry Extension cord 5703466238165 088L0125 Danfoss ECdry Extension cord 1 m ECdry Extension cord 5703466238172 088L0126 Danfoss ECdry Extension cord 2 m ECdry Extension cord 5703466238189

Output

55 W/m² + + + +

100 W/m² – + + +

Wood Concrete Wood Laminate

Subﬂoor Top ﬂoor