Danfoss EBI4 C Data sheet
Data sheet
Electronic Ignition Units
EBI4 C Series
Application
The EBI4 C unit series is specially designed for
applications where const ant ignition is required.
EBI4 CM is a 2-pole version with secondary midpoint grounded. EBI4 C1P is a 1-pole version for
ignition between 1 electrode and frame.
EBI4 CM
• Oil/gas burners requiring constant ignition
• 2-pole ignition
•
Secondary mid-point connected to earth/
frame
• 100% ED at 35°C/70% ED at 60°C
•
Top or front connection for secondary cables
• 230 V
EBI4 C1P
•
Gas burners a.o. application requiring
constant ignition
•
1-pole ignition between 1 electrode and
frame
• 100% ED at 35°C/70% ED at 60°C
•
Top or front connection for secondary cables
• 230 V
Applications and Features
• 1- or 2-pole ignition
•
Low power consumption due to high
efficiency (new technology)
•
Earth connection through the primary cable
• Same dimensions and flexible mounting as
the well-known EBI series
•
-
marking in accordance with the direc-
tives: EMC, LVD, RoHs
© Danfoss | 2019.08
VD.AY.M2.02 | 1
Data sheet Electronic Ignition Units EBI4 C Series
Technical data
Dimensions and
connections
Type EBI4 CM EBI4 C1P
Mains connection 230 V - 0.25 A - 50/60 Hz - 60 VA
Working range 187-255 V
Main fuse 10 A
ED % in 3 min. 100% at 35°C/70% at 60°C
Secondary connection*
Short circuit current (rms)
Frequency
Ambient temperature -10 to +60°C
Storage temperature -25 to +85°C
Enclosure IP 40
Primary connection 3 × 0.5 mm2 cable with special plug
Secondary connections 2 × Ø4 mm plugs 1 × Ø4 mm plugs
Earthing Through the primary cable
Distance between electrodes Recommended 2.5 mm to 5 mm
Weight 300 g
* Avoid use of divergent electrodes due to risk of electrical cable break down and too high ignition voltage.
EBI4 CM EBI4 C1P EBI4 CM EBI4 C1P a: Left terminal
a+b+c b+c
2 × 7.5 kV
30 mA (rms)
25 kHz
3 × 0.75 mm2 cable with standard AMP connection
b: Right terminal
c: Earth connection
12 kV
30 mA (rms)
25 kHz
Primary plug
With secondary front connection
With secondary top connection
Additional documentation on burner components is available on http://heating.danfoss.com/
Bush secondary
Primary plug
Bush secondary
2 | © Danfoss | DHS-SDDT/DK | 2019.08
VD.AY.M2.02
Loading...