Danfoss EBI4 Data sheet

Data sheet

Electronic Ignition Units

EBI4, 120 V Series

Application

The EBI4, 120 V series is electronic ignition units for intermittent ignition between 2 electrodes or 1 electrode and frame in small and medium size oil or gas burners.

Low weight and small dimensions, due to high frequency operation, makes the EBI4, 120 V series very suitable for use in modern compact burners.

Connections with a plug on the primary side and bushes on the secondary side make installation and service quick and simple.

EB14 M, 120 V

• Oil/gas burners

• 2-pole ignition

•

Secondary mid-point connected to earth/

frame

• 33% ED at 60°C

• Front connection for secondary cables

• 120 V

EB14 1P, 120 V

• Gas burners

•

1-pole ignition between 1 electrode and

frame

• 33% ED at 60°C

• Front connection for secondary cables

• 120 V

Applications and Features

• 1- or 2-pole ignition

•

Low power consumption due to high

eﬃciency (new technology)

•

Earth connection through the primary cable

or through the earth terminal on the side

• Same dimensions and ﬂexible mounting as the well-known EBI3 series

•

marking in accordance with the direc-

tives: EMC, LVD, RoHs

VD.AY.U3.02| 1

Danfos produc Al

Danfoss A/S

Heating Segment • heating

Data sheet Electronic Ignition Units EBI4, 120 V Series

Technical data

Dimensions and connections

Type EBI4 M, 120 V EBI4 1P, 120 V

Mains connection 120 V - 0.40 A - 50/60 Hz - 50 VA

Working range 102 - 132 V

Main fuse max. 10 A

Secondary connection* Short circuit current Frequency

2 × 7.5 kV amp.

40 mA (rms)

22 kHz

12 kV amp.

40 mA (rms)

22 kHz

ED in 3 minutes (cutting in) 33% at 60°C

Ambient temperature -10 to +60°C

Storage temperature -25 to +85°C

Enclosure IP 40 (not for secondary connections)

Primary connection 3 × 0.5 mm2 cable with special plug

Secondary connections 2 × Ø4 mm plugs 1 × Ø4 mm plugs

Earth connection Through the primary cable or earth terminal on side

Distance between electrodes Recommended 2.5 mm to 5 mm

Weight 235 g

* Avoid use of divergent electrodes due to risk of electrical cable break down and too high ignition voltage.

a: Left terminal b: Right terminal c: Earth connection

Primary plug

EBI4 M: a+b+c

EBI4 1P: b+c

Bush, secondary

s can accept no responsibility for possible errors in catalogues, brochures and o ther printed material. Danfoss reserves the right to alter its products w ithout notice. This also applies to ts already on order provided that such alterations can be m ade without subsequential changes being necessary in specications already agreed.

l trademarks in this material are p roperty of the respective companies. Danfoss and a ll Danfoss logotypes are trademarks of Danfoss A/S. All rights r eserved.

Additional documentation on burner components is available on http://heating.danfoss.com/

.danfoss.com • +45 7488 2222 • E-Mail: heating@danfoss.com

VD.AY.U3.02