Danfoss DV15-P5-24-FD Technical Information
Directional Control Valves Technical Information
4 Way, 2 Position Hydraulic Piloted
DV15-P5-24-FD
OPERATION
The DV15-P5-24-FD is a normally open, 5-ported piloted directional
control valve, 2-position, 4-way, 15-size. It is shifted by applying
pilot pressure to port 5. In the normal position, ow is allowed
between ports 3 and 4, and ports 2 to port 1. During transition,
ow is temporarily allowed between all four ports. When fully
shifted ow is allowed ports 3 to 2, and ports 4 to port 1.
APPLICATIONS
This valve is primarily used for reversing fan drive circuits where the open-transition design is important for smooth
shifting and minimal pressure spikes during reversing. The valve can be piloted with many 2-way valves including
solenoid, sequence, relief or manual valves with the internal pilot drain orice option. Alternatively, it can also be
piloted with a 2-position, 3-way solenoid valve using the internal pilot drain plug option.
SPECIFICATIONS
Rated Pressure* 230 bar [3335 psi]
Rated Flow at 7 bar
[100 psi]
Maximum Rated Flow 80 l/min
Minimum pilot pressure 2 bar [29 psi]
Weight 0.44 kg [0.95 lbs]
Cavity NCS12/5
* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).
70 l/min
[18.4 US gal/min]
[21.1 US gal/min]
PERFORMANCE CURVE
SCHEMATICS
DV - 39BC332375730110en-000101 • February 2020
DIMENSIONS
mm [in]
Directional Control Valves Technical Information
4 Way, 2 Position Hydraulic Piloted
DV15-P5-24-FD
EXAMPLE CIRCUITS
Piloted with 2-way valve and internal pilot drain orice option
DV15-P5-24-FD
SVP08-NC
Reversing Fan Drive Circuits
ORDERING INFORMATION
Piloted with 3-way valve and internal pilot drain plug option
DV15-P5-24-FD
SV08-23-01
Loading...