Danfoss DV15-P5-24-05 Technical Information
Directional Control Valves Technical Information
4 Way, 2 Position Hydraulic Piloted
DV15-P5-24-05
OPERATION
The DV15-P5-24-05 is a normally-open, 5-ported piloted directional
control valve, 2-position, 4-way, 15-size. It is shifted by applying
a pilot pressure to port 5. In the normal position, ow is allowed
between ports 3 and 2, and ports 4 to 1. During transition, the ow
patterns remain the same. When the spool is fully shifted, all four
ports are closed.
APPLICATIONS
Use this valve for applications including on-o control of uni-directional motors. The valve can be piloted with
many 2-way valves including solenoid, sequence, relief or manual valves with the internal pilot drain orice option.
Alternatively, it can also be piloted with a 2-position, 3-way solenoid valve using the internal pilot drain plug option.
SPECIFICATIONS
Rated Pressure* 230 bar [3335 psi]
Rated Flow at 7 bar
[100 psi]
Maximum Rated Flow 80 l/min
Minimum pilot pressure 2 bar [29 psi]
Weight 0.44 kg [0.95 lbs]
Cavity NCS12/5
* Rated Pressure based on NFPA fatigue test standards (at 1 Million Cycles).
70 l/min
[18.4 US gal/min]
[21.1 US gal/min]
SCHEMATIC
PERFORMANCE CURVE
DV - 41BC332375730110en-000101 • February 2020
DIMENSIONS
mm [in]
Directional Control Valves Technical Information
4 Way, 2 Position Hydraulic Piloted
DV15-P5-24-05
EXAMPLE CIRCUITS
Piloted with 2-way
valve and internal
pilot drain orice
option
ORDERING INFORMATION
Uni-directional Motor Control, Normally On
Piloted with 3-way
valve and internal
pilot drain plug
option
Loading...