Danfoss DrivePro Exchange Fact sheet

Fact Sheet

DrivePro® Exchange

Cost-efficient alternative to repair downtime

Does your drive need repair, but you can’t afford the downtime to take it out of service?

Then the DrivePro® Exchange service offers exactly the solution you need: the speedy exchange of a failed unit to a new or refurbished unit of the same type.

DrivePro® Exchange ensures that you obtain the fastest, most cost-efficient alternative to repair, when time is critical. You prevent excessive downtime, thanks to quick and correct replacement of the failed drive:

•Exchange any drive, Danfoss or non-Danfoss

•The exchange drive is ready on site, to ensure absolutely minimal production delay

•Local technicians ensure smooth exchange

Maintain productivity

DrivePro® Exchange ensures optimal process uptime and productivity during the replacement process, thanks to:

•Optimal choice of replacement drive power size

•Newest software in replacement drive

•Fast delivery

•Saved time, saved cost

•Elimination of repair time

Local fit, worldwide

We ensure that the replacement drive is in full compliance with local regulations.

And you enjoy worldwide support by Danfoss global service organizations.

What are the benefits?

•Improve process efficiency

–Prevent unexpected issues arising with extended production stop

•Increase the uptime on the production line

–Reduce the duration of costly production stop

•Save loss of production income

–Avoid costly production stop due to failure of drives

Feature

Calculation: replacement versus repair time

Fast delivery of exchange drive

Best dimensional match

–Size of exchange drive is equal to or smaller than that of the failed drive

Best performance match

–Power, performance and software of exchange drive is equal to or better than that of the failed drive

Benefit

Obtain the fastest, most cost-efficient solution when a drive fails

Prevent excessive downtime on the production line

Avoid turnover losses due to lost process availability during replacement

– Fast installation due to perfect dimensional fit

Avoid turnover losses due to lost process availability after replacement

–Ongoing reliability due to best performance match

Stay calm. You’re covered

All DrivePro® services offer the comfort of knowing Danfoss Drives takes responsibility for supporting its AC drives products well into the future:

•Industry’s longest warranty coverage, up to six years

•Spare parts support for up to 10 years beyond discontinuation of a product line

•24/7 delivery

•One call, one single point of contact

•Certified factory and local technicians

•Original equipment replacement parts

Immediate

action, maintaining high process uptime.

drivepro.danfoss.com

Coverage

DrivePro® Exchange ensures that you receive an exchange drive equivalent to your defect drive in the power range up to 450 kW:

1:1 exchange to new drive OR 1:1 exchange to refurbished unit

For exchange of drives in the power range above 450 kW, Danfoss Drives keeps modules in stock, available for fast delivery.

The term 1:1 means that size and performance of the exchange drive match or exceed the original drive.

The quality and version of the exchange drive fulfills one of these criteria:

•New drive delivered direct from factory stock.

•New drive delivered from local/ regional stock with updated hardware and software version.

Availability

DrivePro® Exchange is available for the following Danfoss Drives products:

VLT® drives

		VLT® Midi Drive FC 280	VLT® AutomationDrive FC 301/302
		VLT® Micro Drive FC 51	VLT® AutomationDrive FC 360
		VLT® Micro Drive FC 51	VLT® AutomationDrive FC 360
		VLT® HVAC Basic Drive FC 101	VLT® Decentral Drive FCD 302
		VLT® HVAC Drive FC 102	VLT® DriveMotor FCM 106/FCP 106
		VLT® Refrigeration Drive FC 103	VLT® OneGearDrive®
		VLT® AQUA Drive FC 202	VLT® Soft Starters MCD 500/600
		VLT® Advanced Active Filter AAF 006

VACON® drives

VACON® 100 Industrial

VACON® 100 Flow

VACON® NXP Liquid Cooled Drive/Enclosed Drive

VACON® NXP Air Cooled

VACON® NXC Air Cooled Enclosed Drive/Low Harmonic

If your product is not listed, please contact your local Danfoss Drives representative.

How to order

With one call, the DrivePro® Exchange setup ensures a smooth exchange and safe return to production, fast. You can order either online, via email or telephone.

Find your local Danfoss Drives contact at:

Local contacts

DrivePro® Exchange at a glance

Request exchange drive

Receive drives

Install and commission drives*

Agree on DrivePro® Exchange based on urgency

Danfoss Drives ships the exchange drive within 24 hours of ordering

Get help with DrivePro® Start-Up

* Optional step

Immediate

action, maintaining high process uptime

Stay calm.

You’re covered

Danfoss Drives secures:

More uptime

Any information, including, but not limited to information on selection of product, its application or use, product design, weight, dimensions, capacity or any other technical data in product manuals, catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, online or via download, shall be considered informative, and is only binding if and to the extent, explicit reference is made in a quotation or order confirmation. Danfoss cannot accept any responsibility for possible errors in catalogues, brochures, videos and other material. Danfoss reserves the right to alter its products without notice. This also applies to products ordered but not delivered provided that such alterations can be made without changes to form, fit or function of the product. All trademarks in this material are property of Danfoss A/S or Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All rights reserved.