Data sheet
Drinking Water Storage Tanks
made of Stainless Steel 1.4571 SE, SES, SEK-LK
General description / |
|
Stainless steel drinking water storage tanks |
|
||
Application |
|
for storage charging systems ThermoDual®, |
|
|
ThermoClean® -Combi, charging by external |
|
|
heat exchanger. |
|
|
|
|
|
|
Technical Data |
|
|
|
Material |
Stainless steel, MN 1.4571/1.4404 |
||
|
|||
|
|
|
|
|
Maximum permissible operating temperature: |
95 °C |
|
|
|
|
|
|
Maximum permissible operating pressure: |
10 bar |
|
|
|
|
|
Surface Treatment |
Tank completely pickled and passivated |
|
|
|
|
||
Certificate |
According internal factory norm and PED – Pressure Equipment Directive (2014/68/EU) |
© Danfoss | 2018.04 |
VD.BO.A7.02 | 1 |
Data sheet |
|
Drinking Water Storage Tanks Stainless Steel |
|
|
|
|||||
General technical data: Thermal insulation / heat loss data and tilt dimensions |
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
Volume acc. |
Tilt |
Limit acc. ErP 814/2014 |
|
Data |
|
Type of tank |
|
||
|
ErP 812/2014 |
dimension |
Category B |
Category C |
Real value |
|
Number of pieces |
SE |
SES |
SEK-LK |
|
[l] |
[mm] |
kWh/24h |
kWh/24h |
kWh/24h |
|
Shell |
|||
|
|
|
|
|
||||||
|
105,0 |
895 |
1,19 |
1,66 |
1,30 |
|
2 |
100 |
- |
- |
|
201,0 |
1625 |
1,47 |
2,06 |
1,39 |
|
1 |
200 |
200 |
- |
|
289,0 |
1790 |
1,68 |
2,36 |
1,58 |
|
1 |
300 |
300 |
- |
|
345,0 |
1755 |
1,77 |
2,48 |
1,84 |
|
2 |
350 |
350 |
350 |
|
411,0 |
1800 |
1,85 |
2,06 |
2,05 |
|
2 |
400 |
400 |
- |
|
490,0 |
1800 |
2,00 |
2,80 |
2,36 |
|
2 |
500 |
500 |
500 |
|
646,0 |
1875 |
2,19 |
3,07 |
2,70 |
|
2 |
650 |
650 |
- |
|
756,0 |
2085 |
2,30 |
3,22 |
2,89 |
|
2 |
750 |
750 |
750 |
|
890,0 |
1950 |
2,45 |
3,44 |
3,18 |
|
2 |
900 |
900 |
- |
|
990,0 |
2095 |
2,54 |
3,57 |
3,36 |
|
2 |
1000 |
1000 |
1000 |
|
1215,0 |
2055 |
2,75 |
3,86 |
3,40 |
|
2 |
1250 |
- |
- |
|
1415,0 |
2300 |
2,94 |
4,13 |
3,89 |
|
2 |
1500 |
- |
- |
|
1975,0 |
2635 |
3,26 |
4,58 |
4,31 |
|
3 |
2000 |
- |
- |
All the heat loss values are valid for dTK = 40K; determined according EN 12897, e.g. room temperature = 20° and tank temperature = 60°C.
Type SE 100 |
|
|
|
|
|
|
|
1 |
Domestic water (cold) R ¾“ |
1 |
|
3, 25 |
|
|
|
2 |
Domestic water (hot) R ¾“ |
22 |
2 |
|
|
||
3 |
Circulation (inlet) ISO ¾“ |
|
|
|
|
|
D |
22 |
Pocket for sensor |
|
|
|
|
|
|
|
|
|
|
|
d |
||
|
10 × 1,0 mm |
|
|
|
|
|
|
23 |
Drain Rp ½“ |
|
|
|
|
|
|
25 |
Inspection opening |
|
|
|
|
|
|
|
Rp 2“ with plug |
|
|
|
|
|
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>H1 |
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>H2 |
|
|
|
|
23 |
|
<![if ! IE]> <![endif]>85 |
3 |
|
|
|
|
|
|
0° |
||
|
|
|
|
|
|
Type |
Volume |
H1 |
H2 |
D |
d |
|
Connections |
|
Weight |
|
SE |
Liter |
mm |
mm |
mm |
mm |
1,2 R |
3 Rp |
23 Rp |
app. kg |
Code |
|
|
|
|
|
|
|
|
|
|
|
100 |
100 |
810 |
733 |
590 |
450 |
¾“ |
¾“ |
½“ |
36 |
640U4900 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thermal insulation |
High-quality thermal insulation (CFC-free) made of EPS with laminated fleece for optimum tight on the tank |
|
and to avoid convection and chimney effects. Insulation thickness 50/20 = 70mm, thermal conductivity |
|
λ = 0,032 / 0,038 W / (m * K), with polystyrene cover, color blue RAL 5000. Completely assembled, fire |
|
resistance class B2 according to DIN 4102 T1, with hand hole cover and rosettes for all connections. |
|
Floor insulation insert made of 50mm fleece. Thermal insulation with hook strip, completely removable. |
|
Energy efficiency class „C“ according to ErP Directive 812 + 814/2013 (Eco-design and Label Regulation). |
2 | © Danfoss | 2018.04 |
VD.BO.A7.02 |
Data sheet |
Drinking Water Storage Tanks Stainless Steel |
Type SE 200 ... 1000 |
|
|
|
|
|
|
|
|
|
|
|
|
1 |
Domestic water (cold) |
|
|
|
|
|
|
|
|
|
D |
|
2 |
Domestic water (hot) |
|
|
|
29 |
|
|
|
|
|
d |
|
3 |
Circulation (inlet) |
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
||
21 |
Thermometer Rp ½“ |
|
|
|
|
|
|
|
|
|
|
|
22 |
Thermostat, STM, |
|
|
|
|
|
|
|
|
|
|
|
|
STL, sensor Rp ¾“ |
|
22 |
37 |
2 |
|
|
|
|
|
|
|
23 |
Drain Rp ¾“ |
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
||
25 |
Inspection 120/180 mm |
|
|
|
|
25** |
|
|
|
|
|
|
29 |
Air-vent Rp ¾“ |
|
|
|
21 |
|
|
|
|
|
|
|
37 |
Heat exchanger G 1½“ |
|
|
|
|
|
|
|
|
|
|
|
38 |
Charging group G 1¼“ |
<![if ! IE]> <![endif]>660 |
|
|
3 |
|
|
|
|
|
|
|
40 |
Muff for bracket Rp 1“, |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
α |
45° |
|
||
|
|
|
|
|
|
|
|
|
|
|
||
* |
Tolerance: 0 ... +10 mm |
<![if ! IE]> <![endif]>H* |
|
40 |
|
|
|
<![if ! IE]> <![endif]>H2 |
|
38 |
23 |
<![if ! IE]> <![endif]>200 |
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>H3 |
|
|
|||
** |
2´nd inspection hole only |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
22 |
|
<![if ! IE]> <![endif]>H4 |
|
β |
|
1 |
|
||
|
for tanks SE 900 & SE 1000 |
|
|
|
|
|
70(78) |
|
||||
|
|
|
|
|
|
|
|
|
70 |
|
||
|
|
|
|
|
|
25 |
<![if ! IE]> <![endif]>H5 |
|
|
|
|
|
|
|
|
|
|
22 |
|
|
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>170 |
|
|
|
|
|
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>100 |
|
|
|
|
|
|
|
|
|
|
|
|
<![if ! IE]> <![endif]>70* |
|
|
|
|
|
<![if ! IE]> <![endif]>H1* |
|
|
|
|
|
|
|
|
38 |
1, 23 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connections |
|
|
|
|
Volume |
H |
H1 |
H2 |
H3 |
H4 |
H5 |
D |
d |
|
|
1,2 |
|
Weight |
|
|
|
|
3 |
|
|||||||||||
Type SE |
Liter |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
mm |
α |
ß |
Rp |
Rp |
app. kg* |
Code |
200 |
200 |
1595 |
230 |
1000 |
700 |
600 |
270 |
650 |
450 |
31,6° |
75° |
1½“ |
¾“ |
44 |
640U4901 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
300 |
300 |
1760 |
240 |
1150 |
850 |
750 |
435 |
700 |
500 |
30,8° |
75° |
1½“ |
¾“ |
50 |
640U4902 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
350 |
350 |
1725 |
250 |
1150 |
840 |
740 |
435 |
750 |
550 |
30,1° |
75° |
1½“ |
¾“ |
57 |
640U4903 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
400 |
400 |
1745 |
260 |
1140 |
830 |
730 |
435 |
800 |
600 |
29,4° |
65° |
1½“ |
1“ |
62 |
640U4904 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
500 |
500 |
1765 |
270 |
1140 |
820 |
720 |
435 |
850 |
650 |
28,8° |
65° |
1½“ |
1“ |
70 |
640U4905 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
650 |
650 |
1830 |
300 |
1160 |
860 |
760 |
435 |
950 |
750 |
27,6° |
60° |
2“ |
1“ |
100 |
640U4906 |
750 |
750 |
2045 |
300 |
1390 |
1090 |
990 |
450 |
950 |
750 |
27,6° |
60° |
2“ |
1“ |
115 |
640U4907 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
900 |
900 |
1900 |
300 |
1220 |
860 |
760 |
435 |
1050 |
850 |
26,6° |
60° |
2“ |
1“ |
120 |
640U4908 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1000 |
1000 |
2045 |
300 |
1400 |
1090 |
990 |
450 |
1050 |
850 |
26,6° |
60° |
2“ |
1“ |
135 |
640U4909 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* Weight without thermal insulation
Thermal insulation |
High-quality thermal insulation (CFC-free) made of EPS with laminated fleece for optimum tight on the tank |
|
and to avoid convection and chimney effects. Insulation thickness 80/20 = 100mm, thermal conducti- |
|
vity λ = 0,032 / 0,038 W / (m * K), with polystyrene cover, color blue RAL 5000. Completely assembled, |
|
fire resistance class B2 according to DIN 4102 T1, with hand hole cover and rosettes for all connections. |
|
Floor insulation insert made of 50mm fleece. Thermal insulation with hook strip, completely removable. |
|
Energy efficiency class „C“ according to ErP Directive 812 + 814/2013 (Eco-design and Label Regulation). |
VD.BO.A7.02 |
© Danfoss 2018.04 | 3 |