Danfoss DP 25, DP 50 Data sheet
Data sheet
Definite Purpose Contactors
Type DP 25 to DP 50
Danfoss Definite Purpose Contactors Type
DP 25 - DP 40 (2-pole) and type
DP 25 - DP 50 (3-pole) features:
• 25 - 50 FLA
• Compact design
• Screw or DIN-rail mounting
• Snap on auxiliary contact blocks
Auxiliary contact blocks are available in
normally open, normally closed
Definite Purpose Contactors are designed for
various HVAC applications where a reduced
number of electrical operations is experienced
during a normal life time of the given application.
Features and applications:
Approvals
y Compressor start
y Heating loads
y Pump start
y Fan start
y cULus (UL approval file E63581)
© Danfoss | DCS (az) | 2017.11
IC.PD.C00.D3.01 | 1
Data sheet | Definite Purpose Contactors DP 25 to DP 50
Ordering Definite Purpose
Contactors
Type Pulse FLA
DP 25-2 2 25 150 30 037H4151
DP 30-2 2 30 180 40 037H4152
DP 40-2 2 40 240 50 037H4157
DP 25C-3 3 25 180 125 100 30 037H4150
DP 30-3 3 30 180 150 120 40 037H4154
DP 40-3 3 40 240 200 160 50 037H4156
DP 50-3 3 50 300 250 200 63 037H4159
1 Phase 3 Phase
LRA
240 V
LRA
240 V
LRA
400 - 480 V
LRA
600 V
AC1
lth A
Code no.
Coil voltage AC 1) - coil table
Voltage at 50 Hz 24 110 220 - 230 –
Voltage at 60 Hz 24 110 220 208 - 230
Suffix no. 13 23 32 28
1
) For other coil voltage please contact Danfoss.
Method of ordering
DP contacts are packed as industrial pack.
Minimum order size of DP 25 – 40 is 25 pieces, minimum order size of DP 50 is 10 pieces.
Contactors can be ordered in two ways:
1. By stating type and code number followed by the coil voltage and frequency required.
2. By stating the type and code number followed by a two-digit suffix no. from above coil table.
Ordering Definite Purpose
Contactors
Ordering auxiliary contact
blocks
Ordering and technical data
of thermal overload relays
and accessories
Coil voltage Coils for DP 25 – DP 40C Coils for DP 50
60 Hz 50 Hz Inrush power Hold power Code no. Inrush power Hold power Code no.
24 24
110 110 037H6487 037H6087
220 220 037H6488 037H6088
75 VA
65 W
9 VA
2.7 W
037H6484
140 VA
80 W
11 VA
3 W
Applicable for types DP 25 – DP 50
Type Function Colour code Max. load Code no.
CB-NO Make Green
CB-NC Brake Red 037H0112
6 A
500 AC, 500 VA
037H0111
Thermal overload relays types TI 25C - 30 C and TI 80
Range motor
Type
TI 25C 15 – 20 80 35 80 40 DP 25C – DP 30 047H0213
TI 25C 19 – 25 80 63 80 63 DP 25C – DP 30 047H0214
TI 30C 24 – 32 80 63 80 63 DP 25C – DP 30 047H0215
TI 80 30 – 45 125 100 125 100 DP 50 047H1015
TI 80 42 – 63 100 100 DP 50 047H1016
starter
A A A A A
Type 1 Type 2 Type 1 Type 2
Max. mains fuse
gl, gL, gG BS 88, type T
Fit onto
contactor
type
3-pole
Code no.
037H6084
© Danfoss | DCS (az) | 2017.11
Accessories
Type Pcs. Code no.
3-pole connection bridge for DP 25 single phase load 50
3-pole connection bridge for DP 30 - DP 40 single phase load 50
Base for separate mounting of TI 80 1
Busbar set for DP 50 1
IC.PD.C00.D3.01 | 2
Loading...