Danfoss Din V 3838 Fact sheet

Code nr Valve type

013G0033

RA-N 15 <

013G0034

RA-N 15 =

013G0153

RA-N 15 UK

013G0233

RA-N 15 Right side angle

013G0234

RA-N 15 Left side angle
013G0023 RA-FN <
013G0024 RA-FN =
013G0084 RA-FN =

013G0143 RA-FN UK

013G3003

RA-UN 15<

013G3004

RA-UN 15 =

013G3043

RA-UN 15 UK
013G3723 RA-UN 15< (delta seal)
013G3724 RA-UN 15 = (delta seal)

013G3743 RA-UN 15 UK (delta seal)
013G4241 RA-N 15 (013G0033 in I-pack)
013G4242 RA-N 15 (013G0034 in I-pack)
013G4243 RA-FN 15 (013G0143 in I-pack)
013G9410 RA-N UK (013G0153 in I-pack)
013G9414 RA-N 15 (013G0233 in I-pack)

013G9415 RA-N 15 (013G0234 in I-pack)
013G1340 RA-FN UK spec. Ver.

Change to

Tech Note

From: Comfort Controls
Date: 2004.11.03

Euro Cone, Din V 3838

We are introducing Euro Cone in some valves of German build size. The Euro Cone is described in the German
preliminary norm DIN V 3838.
This norm only includes connections with outside treaded pipe G ¾ A and inside cone

Modification

The modification in the valve is situated as illustrated below

Euro Cone

The advantage with Euro Cone is that fittings for Alu-Pex, Pex and cobber pipe from different suppliers can be used
on the outlet side of the valve, if these fittings meet the Euro Cone standard.
The change to Euro Cone will not have any negative effect as all fittings that could be used with the valves before
can still be used.

Affected products

Delivery

When the mentioned order numbers are produced now they are with the Euro Cone. However existing stock will be
sold first.

The valves with Euro Cone can be identified by the date stamp in the valve; valves with date stamp later than T4
are with Euro Cone.

Technical support

CD-ST, Helle B. Christiansen

VNTWP102