Danfoss DEVIsport Data sheet

4.DataFrost protectionSheetof ground areas

EVIsport™

DEVIsport™

DEVIsport™ heating cable is the sturdy and cost effective single conductor heating cable for the major outdoor installations. The cable has a high mechanical strength both in relation to pulling and deformation making it ideal for installation with specialized cable ploughs.

The single conductor heating cable ensures an even heat generation and temperature distribution along the whole length of the cable.

DEVIsport™ can be customized for the specific project, depending on voltage, required output, length of heating cable and length of cold leads.

Note: It is the full responsibility of the installer/designer to use proper cold lead dimensioned for the purpose and assembly sets that establish sufficient

!mechanical strength, flammability resistance and water tightness - and to design the heating unit with correct output for the specific application to avoid overheating of the cable or building materials.

	Benefits:		Type	Value
			Nominal voltage	U0/U = 300/500 V~
	•	Sturdy cable	Construction	Round, single conductor with screen
	• Very high pulling strength		Output, max	25 W/m
	•	High deformation strength	Max. permissible use temperature, powered	65 °C
	•	Screened and IPX7	Max. permissible use temperature, unpowered	90 °C
			Cable dimensions	Ø 8 mm
	Standard compliance:		Deformation strength	2000 N
	• NF-C 32-330: 2002		Pulling strength	1500 N
	Approvals:		Conductor insulation	XLPE
			Outer sheath	MDPE
			Min. installation temperature	-5 °C
			Bending Ø, min.	6 x cable diameter
			IP Class	IPX7

Types

Item no.	Resistance	EAN no.
84701442	0,040 Ω/m	5703466058480
84701444	0,060 Ω/m	5703466058497
84701446	0,085 Ω/m	5703466058503
84701448	0,100 Ω/m	5703466058510
84701450	0,150 Ω/m	5703435021552
84701452	0,177 Ω/m	5703466058527
84701454	0,255 Ω/m	5703435021569

AI164886464166en-010105

Produced by Danfoss ©