Danfoss DEVIreg Therm Control Data sheet
Data7. Con rolsSheet
EVIreg™
DEVIreg™ Therm Control
The DEVIreg™ Therm Control DHB 330 is designed for controlling DEVIhotwatt™ self-limiting heating cables used for temperature maintenance inside pipes. The temperature can be regulated within a range of 35 °C to 70 °C.
Due to the built-in timer it is possible to switch the system off once every 24 hours eg at night where there is usually not at great demand for hot water, however this will of course affect the comfort. The system can be set up to operate at max. temperature once a week to supress the Legionella bacteria.
A power limiter has been built-in in order not to overload the fuse. After switching the system on it will slowly start up (about 8 min.).
Benefits:
•Legionella protection
•DIN rail mounting
•Built-in power limiter
•Timer
Approval:
Type |
Value |
|
|
Operation voltage |
230V~ +10%/-15% |
Relay |
16 A |
Ambient temperature |
-10 °C to 50 °C |
Temperature range |
35 °C to 70 °C |
Cable max length with 16 A: |
|
DEVIhotwatt™ 55 |
120 m |
DEVIhotwatt™ 70 |
80 m |
Power consumption |
3 VA |
Battery backup |
12 hours |
IP class |
20 |
Protection class |
Class II - |
Dimensions (H/W/D) |
90 mm x 71 mm x 58 mm |
Weight |
0.25 kg |
|
|
Types
Item no. |
|
Product name |
|
EAN no. |
140F1094 |
|
Therm-Control DHB 330 |
|
5703466208953 |
|
|
|||
|
|
|
|
|
AI164886459238en-000103 |
Produced by Danfoss © |
Loading...