Danfoss DEVIreg Multi Data sheet

Data Sheet

DEVIreg™ Multi

DEVIreg™ Multi is 7 channel electronic programmable controller to be installed on DIN rail. Every channel can be individually set up with three control modes – with temperature sensor, time proportional power regulation without sensor and manually on/oﬀ with time limitation. Сhannels inputs can be selected via software between 8 types of temperature sensors including NTC 15 kOhm at 25°C. Modbus RS485 opto-insulated serial interface gives possibility for BMS control.

DEVIreg™ Multi has some special functions which can be programmed for every channel: relay status - opened or closed correspondently to ‘Heating On’ mode, channel activation or deactivation, sensor failure alarm, min and max temperatures alarm, cable failure monitoring, relay test, channel on/oﬀ, relay cycles calculator, etc.

Beneﬁts:

• 7 independent channels

• 3 control modes:

– with temperature sensor – time proportional regulation – manually on/oﬀ

• Heating or cooling control

• Compatible with 8 sensors types

• Accurate temperature control

• Alarm functions

• Cable failure monitoring

• Multilanguage menu

• Graphic LCD display

• BMS control

• Dimensions 8 DIN modules

Standard compliance:

• Low Voltage Directive 2014/35/EU

• EMC Directive 2014/30/EU

• EN/IEC 60730-1 + EN/IEC 60730-2-9

Certiﬁcates:

Type

Nominal voltage 110/230 V AC, 50–60 Hz Power consumption, max. 20 V A Relay resistive (inductive, cos(phi) = 0,6) load:

Total current load limit C1-NO1, C2-NO2 C5-NO5, C6-NO6 C3-NO3-NC3, C4-NO4-NC4 C7-NO7-NC7, C8-NO8-NC8

Sensor inputs Analog inputs AI1-AI8 Sensing unit Temperature sensors separately selectable via

Sensor failure monitoring Disconnected or short-circuited sensor Digital inputs DI1-DI8, voltage free contacts, on/oﬀ inputs Connection speciﬁcation Grouped screws plug-in connectors, pitch 5 mm Cable speciﬁcation for connectors terminals Section cable 0,2-2,5 mm² Battery back-up time, min. 48 hours Ball pressure test 125 °C according to IEC 60730-1 Pollution degree 2 (domestic use) Controller type 1 C Operating temperatures and conditions CE: -20...+60 °C / UL: 0...55 °C,

Storage temperature and conditions -30...+85 °C, 90% RH non-condensing IP class IP40 only on the front cover Protection class Class II Immunity against voltage surges Designed for Over Voltage Category II Dimensions (H/W/D), DIN dimension : 110(122) х 138 х 70 mm, 8 DIN modules Mounting method DIN rail, complying with EN 60715 Weight, net 511 g Menu languages: 2.0 en, bg, cs, da, de, es, et, ﬁ, fr, hr, hu, lt, no, pl,

Base controller Danfoss MCX08M2, item no. 080G0307 Software class A

Value

32 A

10 (3,5) A (100 000 cycles)

6 (4) A (100 000 cycles) 6 (4) A (100 000 cycles) 6 (4) A (100 000 cycles)

software at analog inputs AI1-AI7 between:

NTC15k (15 kOhm @ 25 °C) NTC10k (10 kOhm @ 25 °C)

NTC5k (5 kOhm @ 25 °C) NTC2k (2 kOhm @ 25 °C)

NTC100 (100 kOhm @ 25 °C)

NTC16k (16,7 kOhm @ 100 °C)

PT1000 (1000 Ohm @ 0 °C)

Ni100 (100 Ohm @ 0 °C)

90% RH non-condensing

ro, ru, sk, sl, sv, tr, uk

Types: set DEVIreg™ Multi + 1 sensor NTC 15kOhm

Item no. Product name Type EAN no.

140F1139 DEVIreg™ Multi Programmable controller with Wire sensor NTC 15 kOhm at 25 °C, 3 m 5703466248560

Produced by Danfoss © AI33434718 4693e n-010106

Accessories

Item no. Product name Description EAN no.

140F1095 Room sensor, 426-frame 85 x 85 x 30 mm, NTC 15 kOhm at 25 °C, IP 20 5703466209684

140F1096 Outdoor sensor IP44 80 х 50 х 35 mm, NTC 15 kOhm at 25 °C, IP 44 5703466209691

140F1091

140F1098

19121445

Sensor 3 m, 15 kOhm, Santropene

Temperature Sensor 10 m NTC 15k

Santropene

Sensor cable 40 m, 15 kOhm, Santropene

140F1092 Outdoor sensor 2,5 m, 15 kOhm, PVC

140F1097

084N3209

084N3210

084N1221

084Z6039

080G0180

Silicon sensor for DEVIreg™ 330

(60-160°C), NTC 16,1 kOhm @ 100°C

Sensor EKS 221 NTC 10K 8,5m cable

Sensor EKS 221 NTС 10K 3,5m cable

Sensor EKS 211 NTC 5000 Wire sensor, 3,5 m cable, NTC 5 kOhm at 25 °C, Ø8x30 mm, IP 67

Sensor MBT 153-2200-0350 Wire sensor, 3,5 m cable, PT 1000 kOhm at 0 °C, Ø5,7x40 mm, IP 67

ACCCNX Connectors MCX-08M Screws plug-in connectors set for MCX-08M

Wire sensor, 2x0,75 mm², NTC 15 kOhm at 25 °C, Ø5x18 mm,

black Santropene (TPV), IP 67

Wire sensor, 2x0,75 mm², NTC 15 kOhm at 25 °C, Ø8 mm,

white PVC outer sheath, IP 67

Wire silicon sensor, 2,5 m, 2x0,75 mm²,

NTC 16,1 kOhm at 100 °C, IP 65

Wire sensor, NTC 10 kOhm at 25 °C, Ø6x15 mm, IP 67

5703466209301

5703466210734

5703466115015

5703466209318

5703466209707

5702428171960

5702428099431

5702423151431

5702423284696

Connection scheme

Power

110/230 V AC

AI 1

COM

AI 2

COM

AI 3-4

Channel #1 Channel #2 Channel #3 Channel #4 Channel #5 Channel #6 Channel #7 Alarm RS485

DI 1

C 1

NO 1

DI 2

C 2

NO 2

DI 3

NC 3

COM

DI 1-4

CMR #1 CMR #2 CMR #3 CMR #4 CMR #5 CMR #6 CMR #7

S - temperature Sensor; CMR - Current Monitoring Relay

<I <I <I <I <I <I <I

C 3

General MCX08M2 controller connection scheme

AI 3

NO 3

RS485

(Modbus)

D -

AI 4

DI 4

NC 4

C 4

NO 4

DI 5

AI 5

COM

AI 5-8

C 5

NO 5

DI 6

AI 6

C 6

NO 6

DI 7

NC 7

AI 7

C 7

NO 7

NC 8

DI 8

C 8

NO 8

Dev ice

OFF ON

D +

GND

COM

DI 5-8

To the AI

PWM-PPM

0/10 Vdc

optoinsulated

Not

used

0/10 V

To the AI

(100 mA max)

(120 mA max)

NTC, 0/1 V, 0/5 V,

0/10 V, PT1000

MCX08M2 - TOP

Danfoss

80G8036.04

MCX08M2 - BOTTOM