Danfoss DEVIreg 530M Data sheet

7. Controls

Data Sheet

DEVIreg™

DEVIreg™ 530M

The DEVIreg™ 530 is a simple electronic thermostat with a 2-pole switch to be installed directly on the wall, using a oor sensor (wire) to measure and control the desired oor temperature (max. limit 35° C). It can be either ush-mounted or surface-mounted.

The thermostat has a dial for adjusting the temperature setting with a scale from to 6.

Furthermore, the thermostat has an LED indicating the current mode (heating, standby or fault).

Benets:

• 2-pole safety breaker

• Low standby consumption

• Max. temperature limit 35° C

• Sensor failure monitoring

• LED indication for fault

• Frost protection

Standard compliance:

• EN/IEC 60730-1 (general) and EN/IEC 60730-2-9 (thermostat)

Approvals:

k H B d

Type

Operation voltage

Standby power consumption

Relay: Resistive load Inductive load

Sensing unit

Hysteresis

Ambient temperature

Temperature range

Cable specication max

Ball pressure test temperature

Pollution degree

Controller type

Storage temperature

IP class

Protection class

Dimensions (H/W/D)

Weight

Value

220 V- 240V~ 50/60 Hz

max. 0.25 W

Max 15A / 3450W @ 230V

Cos Φ = 0.3 max. 1A

NTC 15 kOhm at 25° C

± 0.4° C

-10° C. to +30° C

15-35°C with oor sensor only

1 x 4 mm2 or 2 x 2,5 mm

75° C

2 (domestic use)

1 C

-20° C to +65°C

Class II -

85 mm x 85 mm x 36 mm

90 g

Accessories and spare parts on page 93

Types

Item no. Product name Type EAN no.

140F1101 DEVIreg™ 530 With oor sensor and ELKO frame 5703466210406

VDJWG102