Danfoss DEVIreg 527 Data sheet
8. Timers
Data Sheet
DEVIreg™
DEVIreg™ 527
DEVIreg™ 527 is an electronic 15 Amps on/off time regulator with a 2-pole switch and for
flush-mounted fixing. This regulator is best suited for installations in which it is impossible to
install or replace a floor sensor.
DEVIreg™ 527 does not require a sensor and does not regulate according to the
temperature, it’s a timer with 30 min cycle. The heating intervals (relay ON) can be set on a
scale from 0 to 6, which corresponds to 0-100% of the 30 min cycle (100% = 30 min). Each
dial position (from 0 to 6) corresponds to 5 minutes.
Furthermore, regulator has a LED indicator showing relay OFF (green light) and relay ON (red
light) periods.
Benefits:
• Double pole safety breaker
• Low standby consumption
• No sensor required
Standard compliance:
• EN/IEC 60730-1
Approvals:
Types
Item no. Product name Type EAN no.
140F1041 DEVIreg™ 527 ELKO frame, no sensor 5703466209103
Connection scheme
Type
Operation voltage 220-240 V, 50 Hz
Standby power consumption Max. 0,25 W
Relay:
Resistive load
Inductive load
Ambient temperature -10 °C to +30 °C
Cable specification max. 1x4 mm2 or 2x2,5 mm
Ball pressure test temperature 75 °C
Pollution degree 2 (domestic use)
Controller type 1C
IP class IP 31
Protection class
Dimensions (H/W/D)
Weight
DEVIreg™ 527
Value
Max. 15 A (3450 W) @ 230 V
Max. 1 A, cos φ= 0,3
Class II -
85 x 85 x 36 mm
90 g
2
N
230 V~
L
PE
N
NL
LOAD
L
LOAD
0...6
(0...100%)
Produced by Danfoss ©AI164886459177en-000103
Loading...