Danfoss DEVIreg 330 Data sheet
7. Controls
Data Sheet
DEVIreg™
DEVIreg™ 330 (60°C to 160° C)
The DEVIreg™ 330 is an electronic thermostat to be installed in electric cabinets with DIN rail
attachment. Used primarily for temperature maintenance in pipe systems.
The thermostat must be installed via an all-pole disconnection switch and has a LED indicating the current mode (heating, standby or fault).
To measure and control the desired temperature a wire sensor or an outdoor air sensor must
be used. The temperature setting can be adjusted with a scale from 60° C to +160°C.
Benets:
• For DINrail mounting
• Temperature maintenance
• Low standby consumption
• LED indicator
Standard compliance:
• EN/IEC 60730-1 (general),
EN/IEC 60730-2-9 (thermostat)
Certicates:
k
Type
Operation voltage
Standby power consumption
Relay:
Resistive load
Inductive load
Sensing unit
Hysteresis
Ambient temperature
Lowering in economy periods
Temperature range
Cable specication max
Ball pressure test temperature
Pollution degree
Controller type
Storage temperature
IP class
Protection class
Dimensions (H/W/D)
Weight
Value
220 V- 240V~ 50/60 Hz
max. 0.25 W
Max 16A / 3680W @ 230V
Cos Φ = 0.3 max. 1A
NTC 16.7 kOhm at 100° C
± 0.4° C
-10° C to +50° C
5° C
60° C to 160° C
1 x 4 mm2 or 2 x 2,5 mm
75° C
2 (domestic use)
1 C
-20° C to +65°C
20
Class II -
85 mm x 36 mm x 58 mm
83 g
2
Types
Item no. Product name Type EAN no.
140F1073 DEVIreg™ 330 Temp. range 60° C to 160° C, incl. sensor 5703466209233
Produced by Danfoss © 07/2015
VDIIP102
Accessories and spare parts on page 93
77
Loading...