Danfoss DEVIreg 233 Data sheet

Data7. Con rolsSheet

EVIreg™

DEVIreg™ 233

(DK ONLY)

The DEVIreg™ 233 is an electronic thermostat designed to be flush-mounted or wallmounted in an installation box from the LK FUGA series. The thermostat is provided with a 1- pole switch and a floor sensor (wire) to measure and control the desired floor temperature. Alternatively an external room sensor can be used.

The thermostat has a button to adjust the temperature setting with a scale from (0) 1 to 6.

	Benefits:		Type	Value
			Operation voltage	220 V- 240V~ 50/60 Hz
	•	Fits LK FUGA frames	Standby power consumption	Max. 1.7 W
	•	Sensor failure monitoring	Relay:
	•	LED indication	Resistive load	Max 13A / 2990W @ 230V
			Inductive load	Cos Φ = 0.3 max. 1A
	•	Room and floor sensors	Sensing unit	NTC 15 kOhm at 25°C
	•	Frost protection	Hysteresis	± 0.4°C
			Ambient temperature	0°C. to +40°C
	Standard compliance:		Frost protection	5°C -
			Temperature range	5°C to 45°C
	•	EN/IEC 60730-1 (general)
			Cable specification max	1 x 4 mm2 or 2 x 2,5 mm2
	•	EN/IEC 60730-2-9 (thermostat)
			Ball pressure test temperature	75°C
	Approvals:		Pollution degree	2 (domestic use)
			Controller type	1 C
			Storage temperature	-20°C to +65°C
			IP class	41 (vertical installation)
			Protection class	Class II -
			Dimensions (H/W/D)	71 mm x 44 mm x 31 mm
				(in-wall depth: 20 mm)
			Weight	77 g

Types

Item no.		Product name		Type		EAN no.
140F1020		DEVIreg™ 233		With floor sensor		5703466208984
19112321		DEVIreg™ 233		With room sensor, white front button		5703466168981

AI164886459170en-010105

Produced by Danfoss ©

Connection scheme

DEVIreg™ 233

		5...45
L N	N L	NTC
LOAD LOAD

L	N	L
Load			NTC
		230 V~
			15 kOhm/25 °C
max 13 A		N

AI164886459170en-010105

Produced by Danfoss ©