Danfoss DEP101A, DEP101B Data sheet

Datasheet, technical data Danfoss Electronic Protection

General Characteristics

Model number (on module nameplate) DE P101A DEP101B

Code number for singlepack 120Z0 584 12 0Z0585

Drawing number 6914 009a 6914010a

Supply voltage AC24V -15% +10% 2W AC110-240V -15% +10% 2W

Ambiant temperature range -35 to 70°C

Relay 250V AC max 5A

Technical Characteristics

Temperature monitoring PTC to DIN 44081/082

- Number of sensors 1...9 in series

- R 25, total <1.8kΩ

- Rtrip 4.50kΩ ±20%

- Rreset 2.75kΩ ±20%

- max. length <30m

After cool down

- Time delay 5min±1min

Phase monitoring

Phase sequence lockout

Phase loss lockout

Status LED Blink Code

Relay (N/O) max. AC 250V, max.5A

Protection class to EN 60529 IP00

Connection 6.3mm conectors

Housing PA66

Mounting screw-mounted or clamped

Dimensions 76.5x81.5x34.5mm

Weight approx. 200g

3 AC 50/60Hz 200...575V ±10% active window t0 + 1s...
t0 + 6s

Dimensions

Connection diagram

Phase sequence input

L1 L2 L3

Black Blue Brown

L N S1 S2 M1 M2

Module power

Blink code

PTC overheat

Internal control cont act

Safety

Thermistor
connecti on

circuit

Recommended Installation Torque

Mounting bolts (2 screws Ø 3.5 mm) 0.5 to 2Nm

Approvals: CE certied, UL (le E363296)

40ms 40ms460ms 460ms

Appr. 1s

PTC reset delay active

80ms 920ms

Appr. 1s

Phase loss error

500ms 500ms

Appr. 1s

Phase reverse error

120ms 120ms120ms 400ms

Appr. 760ms

Danfoss can accept no res ponsibility for p ossible errors in c atalogues, brochures and ot her printed materia l. Danfoss reserve s the right to alter its pr oducts without notice.
This also ap plies to product s already on order provided that such alter ations can be made wit hout sub sequential changes being necessary in s pecications alr eady agreed.
All trademarks in this materia l are property o f the respective companies. Danfoss and the Danfoss l ogotype are trademark s of Danfoss A/S. All rights res erved.

FRCC. ED.DEP101. A1.02 - May 2015