Danfoss CS500 IoT Gateway Data sheet

Data Sheet

PLUS+1® Connect

CS500 IoT Gateway

The PLUS+1® Connect CS500 IoT Gateway offers machine owners and operators CAN bus data logging, asset tracking, and mobile machine management.

The CS500 provides high quality, plug and perform ease of installation, and cost effective solutions to fit the remote monitoring needs of today’s mobile machines.

Product Highlights

The CS500 includes LTE Cat 1 cellular communications, GNSS positioning, 2 CAN bus ports, 2 multifunction inputs, 2 multifunction inputs/ outputs, power management ports, and sensor power. The CS500 is configurable from the PLUS+1 Connect portal.

Remote machine monitoring

From the PLUS+1® Connect portal, the CS500 can be remotely configured to monitor the machine state, performance, and position. Both position and machine data are periodically transmitted and stored to the PLUS+1® Connect portal. The CS500 allows remote upload and download of machine parameters, as well as remote downloads of application software to a machine's PLUS+1® controllers and displays. The PLUS+1® GUIDE and PLUS+1® Service Tool can be used to configure, as well as program, the CS500 via remote or a local CAN bus connection.

Features

•

Easy to install enclosure

•

Plug and perform solution

•

4G LTE Cat 1 with 3G cellular

•

Remote PLUS+1® GUIDE and PLUS+1 Service Tool connectivity

•

PLUS+1® Connect portal to configure logging of machine and position data

•

Firmware-over-the-air (FOTA) update

•

Factory-installed SIM Card

•

2 CAN buses 2.0A/B

•

IP67 Ingress Protection rating

Danfoss | November 2021 AI384967975537en-000102 | 1

•

4 multifunction inputs

•

Power management driven by CL15

including low-power mode with cyclic configurable wake-up

•

Flexible mounting options

•

GNSS position tracking

•

Factory-installed security certificate

Comprehensive technical literature is online at www.danfoss.com

158.80 [6.25]

144.50 [7.69]

107.00 [4.21]

62.00 [2.44]

51.50 [2.03]

114.80 [4.52]

35.40 [1.39]

Data Sheet

PLUS+1® Connect CS500 IoT Gateway

CS500 dimensions in mm [in]

Caution

PCB damage may occur. All device power supply + pins must be connected to battery +.

Caution

Use care when wiring mating connector. Pinouts listed are for device pins.

Use care when wiring mating connector. Pinouts are for device pins.

Electrical

Supply voltage 9 to 36 V Memory 256 MB Min EMI/RFI rating 100 V/M Current consumption

Typical: 100 mA Low-power mode: 5 mA Max

Power Supply / CAN Bus / I/O Connector 1

Pin Designation Description

1 Ground Power supply 2 9 to 36 VDC Power supply 3 CAN 1 High CAN bus 1 4 CAN 1 Low CAN bus 1 5 DIGIN1/CL15 Multifunction Input /

Ignition 6 DIGIN2 DIN / Sensor Power 7 CAN 2 High CAN bus 2 8 CAN 2 Low CAN bus 2 9 MFIO1 Multifunction Input /

Output 10 MFIO2 Multifunction Input /

Output 11 MFIN1 Multifunction Input 12 MFIN2 Multifunction Input

Mechanical

Dimensions

Housing Tamper resistant Color Black Operating

temperature Storage temperature -40 to 85°C [-40 to 185°F] IP rating IP67 with connector mated Weight 350 grams Status LED 2 red / green

107 x 158.8 x 51.5 mm

4.2 x 6.25 x 2 in

-40 to 75°C [-40 to 167°F]

Interface / protocols / certifications

CAN Bus Network 2 (ISO 11898-2 High Speed, 2.0A/B),

up to 1Mbps

Multi-Function Input

Radio Module Global 4G LTE, 3G UMTS/HSPA+,

Available country certifications USA EU CAN, see CS500 country

GNSS Constellations GPS, GLONASS, BeiDou, Galileo Antennas Cellular (External), GNSS (External) SIM Card Factory Installed Certifications FCC, CE, E-Mark, PTCRB Vibrations IEC 60068-2-64 Shock IEC 60068-2-27 test Ea

2 (DIN/AIN/ResIN/FreqIN /CrntIN/CL15/DOUT)

and 2G GSM/GPRS/EDGE

certification list

+ 1 hidden pages