Danfoss CS100 Data sheet

Data Sheet

PLUS+1® Connect

CS100 Cellular Gateway

The PLUS+1® Connect CS100 Cellular Gateway offers machine owners and operators powerful and highly flexible data and position logging.

The CS100 provides high quality, plug and perform ease of installation, and cost effective solutions to fit the remote monitoring needs of today’s mobile machines.

Product highlights

The CS100 includes LTE Cat M1 and 2G cellular communications, GNSS positioning, 2 multifunction I/O, Power Management Port and 2 CAN bus ports. The CS100 is configured and managed from the PLUS +1® Connect portal.

Remote machine monitoring

From the PLUS+1® Connect portal, the CS100 can be remotely configured to monitor the machine state, performance, and position. Both position and machine data are periodically transmitted and stored to the PLUS+1® Connect portal.

Features

•

Easy to install enclosure

•

Plug and perform solution

•

LTE Cat M1 and 2G cellular

•

PLUS+1® Connect portal to configure logging of machine and position data

•

Firmware-over-the-air (FOTA) update

•

Internal cellular and GNSS antennas

•

Factory-installed SIM Card

•

2 CAN buses 2.0A/B

•

IP67 (with connector mated)

•

2 multifunction I/O

•

Power management driven by CL15 including low-power mode with cyclic configurable wake-up

•

Flexible mounting options

•

GNSS position tracking

•

Factory-installed security certificate

•

Internal non-volatile memory allows stored Data Logging for:

‒ ‒ ‒

Comprehensive technical literature is online at www.danfoss.com

CAN messages GNSS position Internal variables

Danfoss | January 2021 AI294265575942en-000102 | 1

CS100 dimensions in mm [in]

177.70 [7.00]

162.00 [6.38]

86.10 [3.40]

71.00 [2.80]

30.42 [1.20]

40.90 [1.61]

2 X Ø 6.3 THRU

9.30 [0.37]

36.0 [1.42]

17.5 [0.69]

23.0 [0.1]

Caution

Warranty will be voided if device is opened. Device is not field serviceable. Do not open the device.

Power supply/ CAN bus/ I/O connector

Pin Designation Color Description

1 Ground Black Power Supply 2 9 to 36 Vdc Red Power Supply 3 CAN 1 high Yellow CAN bus 1 4 CAN 1 low Green CAN bus 1 5 MFIO1/CL15 Brown Multifunction IO/Ignition 6 MFIO2 Orange Multifunction IO 7 CAN 2 high Yellow/White CAN bus 2 8 CAN 2 low Green/White CAN bus 2

Device and part number

CS100 IoT Gateway 11230826

Related product and part numbers

DEUTSCH mating connector bag assembly

K29620 (16-20 AWG)

Electrical data

DC supply voltage 9 to 36 Vdc Memory buffering capacity 16 MB EMI/RFI rating 100 V/m

Mechanical data

Dimension L x W x D 177 x 86 x 41 mm Housing Tamper resistant Color Black Operating temperature -40 to 75°C [-40 to 167°F] Storage temperature -40 to 85°C [-40 to 185°F] IP rating

IP67 (with connector mated) IP69k (when top mounted and with connector plugged in or suitably capped)

Weight 250 grams Status LED 1 Multi-color

Interface/Protocol/Certification

CAN bus network 2 (ISO 11898-2 High Speed, 2.0A/B) Multifunction Input/Output 2 (DIN/AIN/ResIN/FreqIN/CrntIN/

CL15/DOUT)

Radio Module LTE Cat M1 and 2G cellular Cat M1 Throughput (UL/DL) Max 375 kbps / Max 375 kbps 2G-EGPRS Throughput (UL/DL) Max 236.8 kbps / Max 296 kbps Cat M1 LTE FDD Bands B1/B2/B3/B4/B5/B8/B12/B13/B18/B19

/B20/B26/B28

2G – EGPRS Bands 850/900/1800/1900 MHz GNSS Constellations GPS, GLONASS, BeiDou, Galileo Antennas Cellular and GNSS (Internal) SIM Card Factory Installed Certifications PTCRB, RED, CE, E-Mark Vibrations IEC 60068-2-64 Shock IEC 60068-2-27 test Ea

System tools

Software PLUS+1® Connect

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.