Danfoss CS10 Data sheet

Data Sheet

PLUS+1

CS10 Wireless Gateway

The Danfoss PLUS+1® CS10 Wireless Gateway is engineered by security experts and designed for the harsh environments common with Off-Highway equipment. The CS10 is a rugged and secure wireless device for machine monitoring – locally or remotely.

CS10 Wireless Gateway enables a CAN system with Wi-Fi and Bluetooth® connectivity to a smart mobile application for diagnosis and updates. Connect any two CAN systems by adding a second CS10 to support the CAN Bridging functionality. In addition, the CS10 is a wireless replacement for wired connection interfaces like the CG150.

Secure data encryption and a flexible device API further enhance reliability and integration with existing applications.

Features

•

Wi-Fi Access point and Client

•

Bluetooth 4.2 with DLE

•

Bluetooth LE peripheral (usable with Client Library API)

•

CAN Flexible baud rate (50,100,125,250,500,1000Kbps)

•

Supports Internet Protocol v4 and v6

•

PLUS+1® Mobile Service Tool is the configuration interface for Wi-Fi, Bluetooth, and CAN, as well as firmware updates

•

Detect Machine Safe State

•

Bridging with any interlink device: CS10to-CS10

•

Delay shut off feature to maintain wireless connectivity through key cycle

•

J1939 support, KWP2000, UDS

•

API Client library

•

LE Secure connections with Just Works pairing model

•

Brute force attack protection

•

Visual indicators for Power, Wi-Fi connectivity, Bluetooth connectivity, CAN connectivity

•

Plug and perform solution

•

Power management driven CL15 including low-power mode with cyclic configurable wake-up

•

PLUS+1® GUIDE programmable

•

IP67 (with connector mated)

•

Internal memory allows Data Logging

•

ARM Cortex-A7 32-bit 400MHz

•

256MB NAND Flash

•

256MB DDR3L SDRAM

Comprehensive technical literature is online at www.danfoss.com

Danfoss | September 2020 AI314170881786en-000101 | 1

CS10 Wireless Gateway dimensions in mm [in]

144.00 [5.67]

50.80 [2.00]

45.00 [1.78]

30.00 [0.12]

0.50 [0.02]

120.10 [4.73]

79.50 [3.13]

Caution

This device is not field serviceable. Opening the device housing voids the warranty.

6-Pin DTM DEUTSCH connector

Use care when wiring mating connector. Pinouts listed are for device pins.

Electrical data

Operating input voltage 6V to 36VDC Operating input current 60mA typ at 24VDC Power consumption 1.5W typ Shutdown current 1mA max at 24VDC EMI/RFI rating 100V/m

Mechanical data

Dimension LxWxD 144 x 79.5 x 30mm Housing Tamper resistant Color Black Operating Temperature -30C to 70C Storage Temperature -40C to 85C IP Rating IP67 (with connector mated) Weight 110g Status LEDs 1 red/green, 1 blue/white

Pin assignments

Pin Function Pin Function

1 Ground 4 CAN Low 2 Power 5 Key Switch 3 CAN High 6 CAN Shield / Pairing

Interface / protocols / certifications

CAN bus network ISO 11898-2 High Speed, 2.0A/B Wireless module Wi-Fi / Bluetooth combo Antenna Internal Wi-Fi Standards 802.11 a/b/g/n Bluetooth Standards 5.0 (BR/EDR & LE) Certifications FCC, IC, CE/RED, E-mark,

Vibration IEC 60068-2-64 Shock IEC 60068-2-27 Ea

Ordering information

Product part number

CS10 Wireless Gateway 11242005

Related products part numbers

Description Part number

PLUS+1® GUIDE Professional 11179523 PLUS+1® Service Tool AQ00000194 PLUS+1® Mobile Service Tool AQ293083128728

Mating connector assemblies

Type Danfoss ordering

number

Connector bag assembly 10101551 Connector with 400mm [15.75 in] wire harness 10101557

Australia/New Zealand

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.