Danfoss CF-WR Wireless Relay Data sheet

N L 1 2 3 4



Data Sheet

CF-WR Wireless Relay

Application

Ordering

Technical data

CF-WR wireless relay is an accessory to the Danfoss CF2+ wireless floor heating/cooling control system.

CF-WR is used for controlling a condensing boiler, chiller or pump, and due to wireless connection with the CF-MC Master Controller, installation is easy and highly flexible,

Configuration of CF-WR Wireless Relay is made with the CF-RC Remote Controller. Please refer to the instruction for CF-RC for further information.

1. PROG button with PROG LED.

2. Button not used for CF2+.

Product Code no.

CF-WR wireless relay 088U0252

Supply voltage 230 Vac ± 15%, 50 Hz Construction EN 60730-1, EN 300-220-1 Max. ambient temperature 45°C Switch type RZ1 - 1 x SPDT, type 1B Switch rating 264 VAC, 3 (1) A IP class IP 40 Control pollution situation Degree 2 Max. range 30 m Operating frequency 868.42 MHz Software classification Class A Rated impulse voltage 2.5 kV Ball pressure test 75°C Size (L x H x W) 83 x 83 x 31 mm

Wiring Connections

N L 1 Not in use 2 Com 3 Zone 1 on

Electronics

Data Sheet CF-WR Wireless Relay

4 Zone 1 off

Note: For mains voltage applications link terminals L and 2.

Danfoss A/S Heating Solutions Haarupvaenget 11 8600 Silkeborg Denmark Phone:+45 7488 8000 Fax: +45 7488 8100 Email: heating.solutions@danfoss.com www.heating.danfoss.com

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.