Danfoss CF2, CF-MC Data sheet

Data Sheet

CF2+ Wireless Floor Heating Control System

CF-MC Master Controller

Application

CF-MC is the Master Controller in Danfoss’ CF2+ wireless oor heating control system. 2-way wireless communication between CF-MC and other wireless CF2 ensures a high level of transmission security and makes it possible to perform Link test of the signals. Transmission range is up to 30 m in normal buildings. If transmission is reduced or blocked by building or interior elements, a CF-EA external antenna (accessory) can be used to avoid the obstacles. CF-MC is connected directly to 230 V power supply, and it provides all actuator outputs with with 24 V.

CF-MC Master Controller includes features like:

• 2-way wireless transmission at 868.42MHz, for higher transmission security

• Direct link test option on each system component

• Wireless assignment of room thermostats and other system components

• 5 or 10 short-circuit protected outputs with LED indication

• Outputs for 24V NC or NO actuators

• Valve motion for all outputs for approx. 12 min. every 14th day with no heat demand

system components

• PWM (Pulse Width Modulation) principle

• Input (On/O) for heating / cooling

• Input for PT1000 pipe sensor

• Input (On/O) for global standby (can also be used for CF-DS dew-point sensor)

• Relay for pump control with automatic pump motion

• Relay for boiler control, activated only at heat demand

• Easy cable xing at each actuator output for several cable types

• Automatic self diagnosis of errors

Larger CF2 Master Controllers with up to 30 outputs. Systems with more Master Controllers can be accessed by a single wireless CF-RC Remote Controller, which gives access to even more functionality and features, e.g.

• Individual settings for each Master Controller output

• Override and locking of local room temperature settings

• Setback and period programming

• System status etc.

• Forecast

• Low enrgy optimizer

• Control of cooling applications

Find more information in data sheet and instruction for CF-RC.

systems can consist of 2 or 3 CF-MC

Ordering

Accessories

VDSPK302

Product Typ e Outputs Supply Code no.

Master Controller CF-MC 10 / 24 VDC 230 VAC 088U0240

Master Controller CF-MC 5 / 24 VDC 230 VAC 088U0245

Product Typ e Code no.

External antenna with 2 m cable CF-EA 088U0250

Cable extension for external antenna, 5 m CF-EC 088U0255

TWA-A 24 V NC actuator for Danfoss valves TWA-A 088H3110

TWA-A 24 V NO actuator for Danfoss valves TWA-A 088 H 3111

L N

Technical specications

325

Supply voltage 230 VAC

Output voltage 24 VDC

Number of outputs 5 / 10

Transmission frequency 868.42 MHz

Transmission range up to 30 m (in normal buildings)

Transmission power < 1 mW

Max. running load of actuator output 25 VA (total for all outputs)

Max. load for pump relay 230 V, 8 A / 2 A (inductive)

Max. load for boiler relay 230 V, 8 A / 2 A (inductive)

Approvals CE

Standard EN 60730

Directives R&TTE, LVD, EMC

IP class 30

Connection Diagram

Dimensions

ErP class

Length of mains cable 1.5 m

Weight 700 g



  



PT 1000 pipe sensor



Global standby



Heating/Cooling



max. 3 m

Relay outputs



Actuator outputs



External antenna



(2%)

910876 54321

230 50 Hz

Danfoss A/S

Floor Heating Hydronics • Ulvehavevej 61 • DK-7100 Vejle • Denmark • Phone: +45 7488 8500 • Fax: +45 7488 8501 heating@danfoss.com • www.oorheating.danfoss.com

Danfoss ca n accept no respons ibility for pos sible errors in ca talogues, bro chures and other pr inted material. Da nfoss reserves t he right to alter its p roducts with out notice. This als o applies to produ cts already o n order provided t hat such alteratio ns can be made with out subsequenti al changes being n ecessary in spe cications alr eady agreed. All trade marks in this mate rial are proper ty of the respec tive companies . Danfoss and the Dan foss logotyp e are trademark s of Danfoss A/S. Al l rights reserv ed.

VDSPK302