Danfoss CDS 100 Data sheet

Data Sheet

Directional control valve

CDS 100

For more than 40 years, Danfoss has been developing state-of-the-art components and systems for mobile machinery used in off -highway applications around the world. We have become a preferred supplier by delivering know how in motion™.

The CDS Directional Control Valve range provides optimized valve solutions. It is designed for quality, reliability, offers flexibility and greater efficiency versus the competition. Metered spools, low leakage rates and extensive auxiliary options provide accurate, precise control in demanding applications.

All CDS electrical control options are PLUS+1 Compliant. PLUS+1® allows you to rapidly develop and customize electronic machine control.

Features

•

210 Bar [3000 psi] 100 l/min [26.4 US gal/min]

•

40 Bar [580 psi] maximum tank pressure

•

1 to 12 work sections per valve group

•

Parallel/tandem

•

SAE/BSP/Metric thread porting

•

Priority flow control inlet

•

Mid-inlet

•

Float position options

•

Work port relief/anti-cav./metering/ load-holding

•

12/24VDC on-off solenoid pilot operator

•

Mechanical joystick operator

•

Remote lever and cable operator

•

Hydraulic/pneumatic operator

•

Power beyond/pressure bypass

Comprehensive technical literature online at powersolutions.danfoss.com

Danfoss | Jul 2016 11040405 | AI00000031en-US0102 | 1

Dimensions

152

[5.98]

[3.23]

142

[5.59]

100

[3.94]

[0.59]

127

[5.00]

P101820

Specifications

Maximum flow 100 l/min [26.4 US gal/min] Work pressure 210 bar [3050 psi] Maximum pressure 250 bar [3625 psi] Maximum pressure (outlet section) 40 bar [580 psi] Temperature range -40º to 80 ºC [-40 to 176 ºF] Recommended fluid type Mineral based hydraulic oil Recommended viscosity 26-55 mm²/sec (cSt) [123-255 SUS] Minimum fluid cleanliness (per ISO 4406) 19/16

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.