Fact sheet
C12L-EZ Economizer and
Evaporator
Micro Plate Heat Exchanger
40%
heat transfer
increase compared
to traditional
fishbone design.
www.danfoss.com
danfoss.com
C12L-EZ Economizer and Evaporator
Micro Plate Heat Exchanger (MPHE)
42
[1.65”]
INTRODUCTION
KEY FEATURES
Q4
120
[4.7”]
Q1
154
[6.1”]
Q3 Q2
76
[3.0”]
The C12L-EZ is an economizer optimized for R410A for use in VRF, heat pump and bus A/C etc., and also can be used as evaporator for chiller
with a capacity under 5.5KW. Inspired by fish scales, Z-pattern channel plate technology pushes the performance of heat exchangers to the
limits by fully mixing the liquid and gas refrigerant through a “zigzag” flow, which increases the heat transfer coefficient by 40% compared
with traditional fishbone design at the same evaporating temperature. At the same time, inheriting from the dimple features, C12L-EZ reduces
the amount of material used. To meet demands for higher seasonal efficiency, the C12L-EZ is designed to work efficiently and increase comfort
in modern buildings without increasing the carbon footprint. Helping A /C units perform more efficiently, it reduces both energy costs
and environmental impact. The low hold-up volume reduces the system refrigerant charge and offers valuable savings.
- Improved heat transfer - equals higher efficiency chillers
- Minimal hold-up volume - equals less refrigerant charge
- Smaller footprint - enables more compact size
- High heat transfer and minimal refrigerant charge - equals a reduced CO2 footprint
8+1.19*NoP
[0.3+0.047*NoP”]
TECHNICAL DATA
n = NUMBER O F PLATES
STANDARD
MATERIALS
STANDARD
CONNECTIONS
TH IR D- PART Y
APPROVALS
ACCESSORIES
– STUD BOLTS
ACCESSIBILITY
Danfoss can accept no responsibility for possible errors in cat alogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to produc ts
already on order provided that such alterations can be made without consequent changes being necessary in specifications already agree d.
All trademarks in this material are the proper ty of the respec tive companies. Danfoss and the Danfoss lo gotype are trademarks of Danfoss A/S. All right s reserved.
520H11705 | DKQB.PD.310.2G.02
Min. working temperature: -196°C
Max. working temperature: 200°C
Max. working pressure: 45 bar
Hold-up volume: Q1-Q2/ Q3-Q4 (ml): 8.39×n/2 / 9.25×(n-2)/2
Weight (kg): 0.28+0.023xNoP Max. no. of plates: 60
Cover plates: AISI 304L
Connections: AISI 304L
Other material combinations are available on request. Please contact your Danfoss sales representative for more information.
Standard connections as below are optimzed for this product as an economizer in VRF systems. For other connections, please contact your
Danfoss representative, (Internal threaded, R thread (BSPT), NPT and Victaulic are also available).
Q3 (Evaporating side inlet): Soldering 1/4”, 3/8”, 1/2”, 5/8” and 3/4”
Q4 (Evaporating side outlet): Soldering 1/4”, 3/8”, 1/2” , 5/8” and 3/4”
Q1-Q2 (Subcooling side): External threaded G 1/2” and G 3/4”
Europe: Pressure Equipment Directive (PED). America: Underwriters Laboratory Inc (UL). The third party approvals stated are standard for all our
products. For details of other existing approvals or to discuss how we can meet your local needs, please contact your Danfoss representative.
Stud bolts and feet on front and/or back cover plates for mounting support are available upon request. Contact your Danfoss sales representative for further information.
We will help you set up a logistics solution that will meet your needs.
Plates: AISI 316L/AISI 304L
Brazing filler: Pure copper
© Danfoss | DSC (im) | 2017.03+
Loading...