Danfoss BD Controller 101N08 User guide
MAKING MODERN LIVING POSSIBLE
BD Controller 101N08xx Series 12-24 V DC
with Tool4Cool® LabEdition software and Danfoss Bluetooth® gateway
Quick Start Guide
Quick Start Guide |
BD Controller 101N08xx Series 12-24 V DC |
|
|
2 |
DEHC.PS.100.P2.02 |
Quick Start Guide |
BD Controller 101N08xx Series 12-24 V DC |
|
|
|
|
|
|
Contents |
1. |
Checklist................................................................................................................................. |
4 |
|
2. |
Connect cables |
|
|
|
2.1 Single compressor configuration, 12 V DC or 24 V DC..................................... |
6 |
|
|
2.2 Twin compressor configuration, 12 V DC or 24 V DC ....................................... |
7 |
3.Pairing the gateway
|
3.1 Windows XP.................................................................................................................... |
8 |
|
3.2 Windows Vista ............................................................................................................ |
11 |
4. |
Install software................................................................................................................ |
15 |
5. |
Install Product Key......................................................................................................... |
17 |
6. |
Connect network............................................................................................................. |
18 |
7. |
Ready to operate............................................................................................................. |
21 |
8. |
Ordering.............................................................................................................................. |
22 |
9. |
Further information....................................................................................................... |
23 |
DEHC.PS.100.P2.02 |
3 |
Quick Start Guide |
BD Controller 101N08xx Series 12-24 V DC |
1. Checklist
Check that you have the following:
BD Controller 101N08xx Series 12-24 V DC (modules and cables)
Image shows compressor/application modules 101N08xx-series in twin compressor configuration with communication cable asembly
Tool4Cool® LabEdition software installation CD
Product key for BD compressor controller |
DH3TT6RBAD1GW8G68ZM1N8G62ZMCOO916IER6GH2YZEIR |
DC line cords
NTC temperature sensor (alternative: mechanical thermostat)
Danfoss Bluetooth® gateway
USB power supply
Bluetooth® communication cable
Ordering: See section 7.0
4 |
DEHC.PS.100.P2.02 |
Quick Start Guide |
BD Controller 101N08xx Series 12-24 V DC |
|
|
2. Connect cables
Legend for 2.1 & 2.2
A)Application module 101N0820
B)Compressor module 101N0800, 12 V DC / compressor module 101N0810, 24 V DC
C)Line cords
D)Single or twin compressor communication cable assembly
1)Mounting screws
2)Battery
3)Fuse
4)Main switch
5)Evaporator fan
6)Condenser fan
7)Mechanical thermostat
8)NTC temperature sensor (electrical thermostat), alternative: mechanical thermostat
9)NTC auxiliary temperature sensor
10)Compressor(s)
11)Danfoss One Wire/LIN gateway communication interface
12)Modbus-compatible device
13)Danfoss Bluetooth® gateway communication interface
See Intructions DEHC.EI.100.V. for details.
DEHC.PS.100.P2.02 |
5 |
Quick Start Guide |
BD Controller 101N08xx Series 12-24 V DC |
|
|
2.1Single compressor configuration,
12 V DC or 24 V DC
Connect cables as shown:
Wiring diagram
6 |
DEHC.PS.100.P2.02 |
Quick Start Guide |
BD Controller 101N08xx Series 12-24 V DC |
|
|
2.2Twin compressor configuration, 12 V DC or 24 V DC
Connect cables as shown:
Wiring diagram
DEHC.PS.100.P2.02 |
7 |
Quick Start Guide |
BD Controller 101N08xx Series 12-24 V DC |
|
|
|
3. Pairing the gateway |
In order to communicate, Bluetooth® devices must first be paired. Pairing is performed before using the device for the first time. Pairing does not need to be repeated for subsequent use.
Please choose the operative system installed on your computer.
3.1 Windows XP
1.Attach or turn on the Bluetooth® radio adapter (transceiver) for your Windows XP computer.
2.Turn on the Danfoss Bluetooth® gateway by pressing briefly on the push button. The LED will blink green.
Please note!:
The gateway runs for 30 seconds before shutting down automatically.
At each step of the pairing process, check that the LED is still blinking.
If one stage of the pairing fails, turn the gateway on again, and try again.
3.Open Bluetooth® Devices in Control Panel/Printers and Other Hardware (Category view) or Control Panel (Classic view).
Control Panel Category View:
Control Panel Classic View:
8 |
DEHC.PS.100.P2.02 |
Loading...