Danfoss BD1.4F-VSD-HD Data sheet

BD1.4F-VSD-HD

Heavy Duty

Direct Current Compressor

R134a, 12-24V DC

General

Code number (without electronic units)		109Z0251
Electronic unit - Variable Speed		101N2100, 30 pcs: 101N2101
Approvals		–
Compressors on pallet		180
Application
Application		LBP/MBP/HBP
Evaporating temperature	°F	-20 to 59
Voltage range	VDC	9.6 - 17 / 19 - 34
Max. condensing temperature continuous (short)	°F	140 (158)
Max. winding temperature continuous (short)	°F	257 (275)

Cooling requirements

Application		LBP		MBP		HBP
32°C		S		S		S
38°C		S		S		S
43°C		S		S		S
Remarks on application:
HD (Heavy Duty) version of the BD1.4F-VSD which can handle extreme vibrations.
For more info please contact: [e-mail].
Motor
Motor type		permanet magnet, brushless DC
Speed			variable speed
Resistance, all 3 windings (25°C)	mΩ		210
Design
Displacement	cu.in.		0.086
Oil quantity (type)	fl.oz.		2.64 (polyolester)
Maximum refrigerant charge	oz.		5.29
Free gas volume in compressor	fl.oz.		17.60
Weight - Compressor/Electronic unit	lbs.		4.63/0.24

Standard battery protection settings (refer to 101N2100 Instructions for optional settings)

Voltage (0.1 steps)				Min. value		Default	Max. value
12V	± 0.3V DC,	Cut out	VDC		9.6	10.4	17
	all values	Cut in diff.	VDC		0.5	1.3	10
24V	± 0.3V DC,	Cut out	VDC		19	21.3	27
	all values	Cut in diff.	VDC		0.5	1.3	10
Dimensions
Height			inch	A		3.79
				B		3.59
				B1		3.46
				B2		0.99
Suction connector		location/I.D. inch | angle		C	0.252-0259 | 25°
		material | comment			Cu-plated steel | Al cap
Process connector		location/I.D. inch | angle		D	0.252-0259 | 25°
		material | comment			Cu-plated steel | Al cap
Discharge connector		location/I.D. inch | angle		E	0.202-0.205 | 0°
		material | comment			Cu-plated steel | Al cap

Remarks: inch connectors

S = Static cooling normally sufficient

O= Oil cooling

F1	= Fan cooling 1.5 m/s
	(compressor compartment temperature
	equal to ambient temperature)
F2	= Fan cooling 3.0 m/s necessary
SG	= Suction gas cooling normally sufficent

–= not applicable in this area

September 2013

Manufactured by Secop for Danfoss - DEHC.ED.100.X8.22 / 520N1504

1/2

Capacity (ASHRAE LBP)																12V DC, static cooling																								BTU/h								Operational errors (TOOL4COOL® or LED flashes)
rpm \ °F	-20	-13	-10				0			10			14		20				30							41				45					50						59							Error code							Error type
2,000		41	48				78			115			133		162				218							294				325					366						450							or LED			Can be read out in the software TOOL4COOL®
																																																flashes
2,500	32	57	67				107			154			175		210				278							370				409					461						569
																																																6			Thermostat failure
3,000	52	80	92				138			192			216		257				337							447				493					556						685
																																																			(If the NTC thermistor is short-circuit or has no connection,
3,500	51	89	106				164			229			258		306				400							528				582					656						809
																																																			the electronic unit will enter manual mode).
4,000	67	105	122				185			260			295		352				462							611				673					757						928
																																																5			Thermal cut-out of electronic unit
Capacity	(EN	12900 Household/CECOMAF)														12V DC, static cooling																									watt										(If the refrigeration system has been too hea­vily­ loaded,
																																																			or if the ambient tempe­ra­ture­ is high, the electronic unit
rpm \ °F	-20	-13	-10				0			10			14		20				30							41				45					50						59										will run too hot).
2,000		10	12				19			28			32		39				52							70				77					87						107
																																																4			Minimum motor speed error
2,500	9	16	19				31			45			51		61				80							105				116					130						159										(If the refrigeration system is too heavily loaded, the
3,000	14	22	26				39			55			62		74				97							127				140					157						192										motor cannot maintain minimum speed at approximately
3,500	11	24	30				48			68			76		90				116							149				163					181						219										1,850 rpm).
																																																3			Motor start error
4,000	21	32	36				54			75			85		100				130							170				186					209						253
Power consumption																12V DC, static cooling																									watt										(The rotor is blocked or the differential pressure in the
																																																			refrigeration system is too high (>5 bar)).
rpm \ °F	-20	-13	-10				0			10			14		20				30							41				45					50						59							2			Fan over-current cut-out
2,000		14	15				19			24			26		29				35							40				41					43						44										(The fan loads the electronic unit with more than
2,500	19	21	22				25			29			31		34				38							42				43					44						45										0.65Apeak).
																																																1			Battery protection cut-out
3,000	22	24	26				30			36			38		41				46							51				52					53						54
3,500	25	29	31				37			44			46		50				55							60				62					63						65										(The voltage is outside the cut-out setting).
4,000	31	36	38				45			51			53		57				63							69				71					74						79							Wire Dimensions DC
Current	consumption (for 24V applications the following must be halfed)																																										A							Size				Max. length*								Max. length*
rpm \ °F	-20	-13	-10				0			10			14		20				30							41				45					50						59							Cross			AWG			12V operation							24V operation
																																																section
2,000		1.31	1.39				1.65			1.90			2.00		2.15				2.41							2.71				2.82					2.96						3.23
																																																[mm2]			[Gauge]			[m]		[ft.]						[m]			[ft.]
2,500	1.51	1.62	1.68				1.95			2.28			2.42		2.63				2.96							3.25				3.33					3.40						3.45
																																																2.5			12			2.5	8						5				16
3,000	1.78	1.97	2.06				2.40			2.76			2.91		3.14				3.49							3.82				3.92					4.03						4.17
																																																4			12			4	13						8				26
3,500	1.95	2.25	2.38				2.85			3.32			3.51		3.78				4.20							4.58				4.69					4.81						4.95							6			10			6	20						12				39
4,000	3.17	3.24	3.29				3.56			3.93			4.11		4.38				4.86							5.37				5.55					5.75						6.05							10			8			10	33						20				66
																																																				*Length between battery and electronic unit
EER (ASHRAE LBP)																12V DC, static cooling																									BTU/h
rpm \ °F	-20	-13	-10				0			10			14		20				30							41				45					50						59							Accessories for BD1.4F-VSD-HD														Code number
																																																Bolt joint for one compressor								Ø:16 mm								118-1917
2.000		2.88	3.19				4.06			4.78			5.06		5.49				6.29							7.39				7.88					8.58						10.17
																																																Bolt joint in quantities								Ø:16 mm								118-1918
2.500	1.88	2.95	3.33				4.32			5.09			5.38		5.83				6.66							7.79				8.29					9.00						10.57
																																																Snap-on in quantities								Ø:16 mm								118-1919
3.000	2.73	3.55	3.82				4.54			5.16			5.42		5.84				6.68							7.89				8.43					9.19						10.90
																																																Terminal cover for electronic unit																105N9120
3.500	2.09	3.14	3.49				4.42			5.18			5.49		5.96				6.84							8.01				8.50					9.18						10.60
																																																Automoblie fuse									12V: 15A								Not
4.000	2.36	3.09	3.36				4.19			5.00			5.34		5.87				6.83							8.03				8.51					9.15						10.40
																																																DIN 7258									24V: 15A							deliverable
COP (EN 12900 Household/CECOMAF)																12V DC, static cooling																									W/W
																																																Main switch									min. 20A						from Secop
rpm \ °F	-20	-13	-10				0			10			14		20				30							41				45					50						59
2.000		0.69	0.77				0.97			1.14			1.21		1.31				1.50							1.76				1.88					2.04						2.42							Test conditions							EN 12900									ASHRAE
																																																							CECOMAF										LBP
2.500	0.45	0.77	0.89				1.23			1.52			1.62		1.79				2.09							2.50				2.68					2.94						3.53
																																																Condensing temperature									131°F							130°F
3.000	0.62	0.90	1.00				1.29			1.54			1.64		1.80				2.10							2.52				2.70					2.96						3.55
																																																Ambient temperature									90°F								90°F
3.500	0.46	0.83	0.96				1.29			1.56			1.66		1.81				2.10							2.48				2.64					2.87						3.35
																																																Suction gas temperature									90°F								90°F
4.000	0.67	0.88	0.96				1.21			1.48			1.58		1.76				2.07							2.46				2.61					2.82						3.22
																																																Liquid temperature							no subcooling										90°F

refer to 101N2100 Instructions for details

Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.

All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.

2/2

Manufactured by Secop for Danfoss - DEHC.ED.100.X8.22 / 520N1504

September 2013